Neeed Hellllpppp with A/c ;) PLez!

[Green Force]

ok so listen up ppl i need some help with a ac box i have 2x 8" 2'x2' air cooled hoods with 1000 watt hps in each and a 8" to 6" reducer to a 6" vortex to the wall i want to put a a/c box in but i want to kno can i hook up the intake of the 8" hoods and put it to the a/c box on the side and have a 8" hold in the bottom of the ac box or pref the back and eventualy i will hook up a carbon filter to that i run my 6" at full any one out there willing to help me go a/c =)

 

[adc702]

This is what im currently working on.

This is what im currently working on.

Hmmm.. How do I up load some pics?

 

[adc702]

Here's what i'm working on.

Here's what i'm working on.

 

[adc702]

a/c project

a/c project

Hope this helps. I will post more pics of the completed project. This set up is for a sealed room and will not deplete co2 if you connect the 4" intake ducting from a outside source. ( note: you should have a small can fan or T off your ducting for your lights to the 4"(or 6") intake hole that will need to be cut out to help exhuast the back of the a/c unit. The Hot exhuast end of this box should be independent from your lights becuase of possible condesation; Which would not mix well with hot lights!

 

[adc702]

sealed room intake, exhuast diagram.

sealed room intake, exhuast diagram.