my sick plants

[SkyLopes]

hi all, ii have 4 plants they all have smoe kind of symptom, most of them are yellowing since they were small plants and continue to do so and i dont know what to do.. they are on coco and im giving nutes to them at Ph 5.8 and they keep yellowing.. i dont know what to do anymore.. have tried everything.. flushed several times... :/

thanks for the attention

sagarmatha #1






sagarmatha #2








indoor mix #1







indoor mix #2







i know i know.. they are fucking ugly right now.. but i dont know what to do anymore

 

[sproutco]

What kind of fertilizer are you using?(be specific to ingredients) How much are you applying and how often?

 

[Guest]

they need food give them some nitrogen and magniesim (a little epsom salt or calmag).. not too much magniesim but definitly nitrogen.. food also mayb root bound.might ahve to transplant.. what size cntainers,temps??? the details their grow envronment??

 

[SkyLopes]

well, i was doing loads of flush on them but now im trying to give 200 ml of ferts every day, i dont know if it would be good give one day water and one day ferts or ferts every da... they are on 3 liter pots for now

 

[SkyLopes]

im giving them 200 ml of ferts now, i have been "flushing" them with nutes before this lol... thats why i flushed witha lot of plain water..

nute info

nute info

N (N) 8%
P (P2O5 solúvel em CNA + H2O) 9%
K (K2O) 9%
Copper (Cu) 0,2%
Zinc (Zn) 0,35%
Boron (B) 0,02%
Manganese (Mn) 0,02%
Chlorine (Cl) 1%
Magnesium (Mg) 0,6%
Sulphur (S) 1%
Cobalto (Co) 0,005%
Iron (Fe) 0,15%
Molybdenum (Mo) 0,005%

 

[sproutco]

Those fert numbers seem wrong. Double check the % of each element. Also, there was no calcium in your list.

 

[SkyLopes]

double checked and it is correct

 

[sproutco]

N (N) 8%
P (P2O5 solúvel em CNA + H2O) 9%
K (K2O) 9%
Copper (Cu) 0,2%
Zinc (Zn) 0,35%
Boron (B) 0,02%
Manganese (Mn) 0,02%
Chlorine (Cl) 1%
Magnesium (Mg) 0,6%
Sulphur (S) 1%
Cobalto (Co) 0,005%
Iron (Fe) 0,15%
Molybdenum (Mo) 0,005%

Unless there is a misprint, this fertilizer is no good. You have alot of copper and zinc compared to iron and manganese. Your manganese is lower than iron, zinc, or copper. In order of importance: iron>manganese>zinc> copper. You have too little magnesium compared to potassium. The ratio in this fert is 15:1 potassium to magnesium. It should be 8:1 ...containing more magnesium. You have no calcium. It should be maybe 3-4:1 calcium to magnesium. If you get another fert with little or no calcium and magnesium, you can boost the levels of cal/mag by using 1/4 teaspoon (1.25ml) powdered gypsum/calcium sulfate + 1/4 teaspoon (1.25ml) epsom salts/magnesium sulfate per gallon (3.8L) of water along with your regular fertilizer. Even with a misprint and the numbers really are copper .02 and zinc .035 instead of .2 cu and .35, you would have too little manganese.

 

[420KushMaster]

dude,

it sounds like it getting a little confusing with all the scientific chatting....lol

flush them with 9 gallons if they are in a 3 gallon. your ferts sucks not made for Mj.

Go get some earth juice

dont feed everyday unless you really know your plants needs. good luck

 

[SkyLopes]

thanks my friends... im feeding them 200ml when they ask for it (when they are a bit down) and they seem to be recovering and getting green again

im adding epsom salts and powdered gypsum (for construction, is that ok?) with every feeding.. i think its doing ok

cant find powdered gypsum designed especially for plants. looked every place where i live

 

[SkyLopes]

just noticed some brown spots on some fan leaves starting from the top on the plant that is looking better... new growth is being affected.. what can it be? a boron deficiency? also it looks like some leafs are "distorting" or something like that

 

[MynameStitch]

flushing them did bad things you flushed nutrients out of them

they need, iron, your plants are lacking iron

earthjuice microblast will solve that problem

how often was you feeding your plants? asnd snice you flushed them with water lots of it, you flushed everything out of them

what system is your plants in, are they just in coco and nothing else?

flushing was the worst thing you could have done, they didnt have a excess problem they had a nutrient deficiency,

before this happend how often was you feeding them and how much?

also did you wash your coco really well before using it with your plants?:

 

[SkyLopes]

how often was you feeding your plants? asnd snice you flushed them with water lots of it, you flushed everything out of them

yeah, i was giving lots of feed everyday, like a liter per day, lol... since it is hydroponic i thought it was no problem... dumb i am....

thats why i flushed with lots of water


what system is your plants in, are they just in coco and nothing else?

yes, just coco.. manually feeding... i have seem people having really nice plants with 100% coco

before this happend how often was you feeding them and how much?

before what happened? didnt get this question all right... i was feeding a lot like i said and now (after flushes) im giving them 200 ml only when they ask for some (when they are a bit down)

also did you wash your coco really well before using it with your plants?:

yes, very well, many times

 

[SkyLopes]

oh yeahh, and i dont live in america or europe, i live in a place where it is hard to find high-end products for plants...

 

[MynameStitch]

ok well get something that has iron in it with other micros like magniseum and calicum too

200 ml is nutz

you dont need to feed like that

have you been testing your ph? since your prteey much soiless your ph needs to be 5.5 to 6.2

 

[SkyLopes]

ok, after a day, the brow spots are now huge spots, looks like leafs are burning... this is happening only with one plant... anyone have any idea of what is it?