Talking The road not taken...
Two roads diverged in a yellow wood..... nah just kidding.Ok so journal never happened. Hdd crashed; thank god for early winter solstice gift..hehe get it?Like sands through the hourglass so are the days of our lives right? Lets get right too it then shall we? I really wanted to do a ppk but just havent been able to get the perpetual sog going with it. I might try again with three reseviors at some point to kind of stagger a 3 week thing. The roots were much bigger like the actual strands. I thought that was pretty cool, but I used perlite and vermiculite and the pwt was damn tricky. I havent moved on just away for a while. I decided to kinda "re-engineer" my design for the time being while I save my meager amounts after bills for more parts. so lets roll up our sleeves roll up a fatty and break some stuff down..
The box itself:
dumpser find dresser
"ground found" 3/4" plywood cut for front and bottom(that box was missin' some wood ) and a nod to the crypt keeper..
dimension:65"W*31"H*18"D
The innards:flowering:
16 23w cfls x10 2700k x6 6500k
8 socket adapters
some 3 outlet extension plugs
8 lamp splitter "wyes"
wayy too much white black poly and maybe not enough in some places
1 200cfm inline outake
2 bathroom ventilator fans 50cfm one intake the other above flowering lights
a cardboard divide and card board fan house to neaten up above the lights and suck that heat out
dimensions 27"W*18"D*15" pot to bulb "gap"(3")
The innards:clone:
2 14w cfl 1x 6500k 1x5000k (not in yet)
1x 18 true watts el cheapo e17 led
1 bubble cloner: coffee can sized creamer container with some holes in the lid, some waternoodle pieces to hold clones, and 10 gal airpump with a long ass 18" line spiraled with a gazillion holes about 7" from the pump to the bottom end which is closed plumbers epoxy puttied to the bottom (built obviously but.. um ..yeah not in yet)
havent actually decided if im going to veg seeing as my plan is to get the females outta some seeds I just popped and start cloning after the stretch
potting/meduim:
1 gallon container cut tall just over half so the top half is bigger flip it into the bottom throw some 50/50 vermi and perl and stuff 9 of em in there clone to flower; flower to clone. I'm not as desperate on the idea of a zip a week as I was when I was in "oh no im screwed for life" panic mode. I am screwed for life... then I realized everybody is...me human; me survive oogabooga! so I am pretty sure this is gravy of an update next post will be of the finished clone side enjoy and stay high
Two roads diverged in a yellow wood..... nah just kidding.Ok so journal never happened. Hdd crashed; thank god for early winter solstice gift..hehe get it?Like sands through the hourglass so are the days of our lives right? Lets get right too it then shall we? I really wanted to do a ppk but just havent been able to get the perpetual sog going with it. I might try again with three reseviors at some point to kind of stagger a 3 week thing. The roots were much bigger like the actual strands. I thought that was pretty cool, but I used perlite and vermiculite and the pwt was damn tricky. I havent moved on just away for a while. I decided to kinda "re-engineer" my design for the time being while I save my meager amounts after bills for more parts. so lets roll up our sleeves roll up a fatty and break some stuff down..
The box itself:
dumpser find dresser
"ground found" 3/4" plywood cut for front and bottom(that box was missin' some wood ) and a nod to the crypt keeper..
dimension:65"W*31"H*18"D
The innards:flowering:
16 23w cfls x10 2700k x6 6500k
8 socket adapters
some 3 outlet extension plugs
8 lamp splitter "wyes"
wayy too much white black poly and maybe not enough in some places
1 200cfm inline outake
2 bathroom ventilator fans 50cfm one intake the other above flowering lights
a cardboard divide and card board fan house to neaten up above the lights and suck that heat out
dimensions 27"W*18"D*15" pot to bulb "gap"(3")
The innards:clone:
2 14w cfl 1x 6500k 1x5000k (not in yet)
1x 18 true watts el cheapo e17 led
1 bubble cloner: coffee can sized creamer container with some holes in the lid, some waternoodle pieces to hold clones, and 10 gal airpump with a long ass 18" line spiraled with a gazillion holes about 7" from the pump to the bottom end which is closed plumbers epoxy puttied to the bottom (built obviously but.. um ..yeah not in yet)
havent actually decided if im going to veg seeing as my plan is to get the females outta some seeds I just popped and start cloning after the stretch
potting/meduim:
1 gallon container cut tall just over half so the top half is bigger flip it into the bottom throw some 50/50 vermi and perl and stuff 9 of em in there clone to flower; flower to clone. I'm not as desperate on the idea of a zip a week as I was when I was in "oh no im screwed for life" panic mode. I am screwed for life... then I realized everybody is...me human; me survive oogabooga! so I am pretty sure this is gravy of an update next post will be of the finished clone side enjoy and stay high
