What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.

Low Flow High Pressure Pump

chefboy6969

OverGrow Refugee
Veteran
I want to buy a low flow high pressure pump to feed 10 sprayers in my aeroponic grow system. Could anyone recommend a brand of pump and a model number...I have been doing some research but need your help.

Thanks
Stay Safe
Peace
Chefboy
 

cabanetforester

Active member
Bump..

Bump..

I'm also thinking about a similar pump. One that dumps as little heat as possible into solution while maitaining ? presure/flow.

I'll be looking at in-line type pumps. Iwaki pumps (google) might be a good place to start..

I want to try a recirc DWC/Aero type setup in 15 gallon drums. Same as a regular recirc DWC except the return will be HPLV (high pressure low volume) .. err whatever I need to get the exchange rate at something like 15-20/hr. The bottom say 12" would be DWC with airstones.

Good luck, let us know what you find. CF
 
Last edited:

FOF

Member
I'm running 50 misters at 50 microns in a TAG setup using an Aquatec bought from this this site.

I've been cycling it 30 sec on 3 min off throughout the day for 2 months without any problems. It's quiet, too, inaudible from a few feet away.

Edit: If you can't find a pump with a small enough flow rate just attach a ball valve and the end of a section of mainline PVC and open it to stop the backflow.
 
Last edited:

Pipedream

Proudly Growing My Own Since 1969
Veteran
If you only want to run 10 spray-heads or so, take a look inside an EZ Cloner. They use a small pump just as you are describing. For the life of me though I can't remember the name on it. It may be "Pondmaster" but I'm not sure.
 
Top