CannaZen
Well-known member
my current room has little to no non-stagnant air and i believe it it cripples its ability to sustain plants with normal growth rates, every time i have plants in there they get very stagnant, light levels rate near 9-10 on my light meter and it is a 1000W HPS.
i wanted to get some input on cheap and effective air circulation and c02, i'm thinking the simplest solution is to seal off the door well and hang a Exhale CO2 Bag and carbon filter/fan along with a fan or two on the ground helping to circulate air, is this a plausible and successful way to go about it cheaply and effectively? temp isnt bad with the door uncealed but may be a concern with closed circulation, the other option would be to put a hole in the wall and install a air exchange system for fresh air from outside, i have the tools but one concern would be temperatures well below freezing during the winter and also concealment of light and smell.
a rough estimate of the room size is about 10 feet tall, 5-6 feet wide and 8 feet long, i believe i can fit maybe 4 large plants inside effectively.
i wanted to get some input on cheap and effective air circulation and c02, i'm thinking the simplest solution is to seal off the door well and hang a Exhale CO2 Bag and carbon filter/fan along with a fan or two on the ground helping to circulate air, is this a plausible and successful way to go about it cheaply and effectively? temp isnt bad with the door uncealed but may be a concern with closed circulation, the other option would be to put a hole in the wall and install a air exchange system for fresh air from outside, i have the tools but one concern would be temperatures well below freezing during the winter and also concealment of light and smell.
a rough estimate of the room size is about 10 feet tall, 5-6 feet wide and 8 feet long, i believe i can fit maybe 4 large plants inside effectively.
