purpLEsmoke
Member
Hey everyone, some of you would have seen me pretty active recently, i hope this post im making isnt pushing it over the top, i just need some advice due to being quite limited with inline fans where i live.
So i found a few fans, some of the inlines i found cudnt push up to 300 Pa & they cost more than the better competitors i will show below.
I have My 600watt with my Super Sun 2 in a 3x3x6.5 & i might use a carbon filter although smell isnt a very big issue where im going to be staying.
Fans : All 6" & based on max Static Pressure ( Pa )
HIT Series Inline : 275 cfm at 0 Pa , 0 Cfm at 350 Pa ( 90 $ Fan : 70 $ Speed controller ) Confirmed the speed controller has 8 settings
Xpelair XID 150 : 360 CFM at 0 Pa , 0 Cfm at 300 Pa ( 150 $ Fan : 100 $ Speed controller ) Confirmed the speed controller has 5 settings
Ox tube fan 150 : 315 Cfm at 0 Pa , 0 Cfm at 348 Pa ( Price : 100 $ Fan : 40 $ Speed controller) Confirmed the speed controller has 3 settings.
From the specifications ive explained plz correct me if im wrong, i know the fans still operate at something like 0.0075 cfm at their max Pa although it is necessary to describe these figures ? I just described them at 0 cfm at max Pa or is max Pa and cfm all that matter ?
HIT 150 : http://www.hydor.com.au/images/pdf/HIT.pdf Speed Controller for HIT ( REB2.5N Controller ) : http://www.solerandpalau.co.uk/docs/catalogo_general/en_665_674_acces_electrics_fid3257.pdf
XID 150 : http://www.dealec.co.uk/acatalog/pdf/xpelair/xpxid.pdf Speed Controller : http://www.qssupplies.co.uk/bathroom-furniture-shower-taps/67065.htm
Ox Fan 150 :
Link international Specification Data : http://www.ox-fan.com/Uploads/Products/decc1ae71c797cec_WY7XR.pdf
Picture Local specification Data :
As for the Ox fan, i was wondering if its from the international supplier because i looked up the specs and all of them are identical except the RPM speed & Decibels. The rpm low is higher than the rpm on High but that might just be a writing error.
So which is the better choice ?
Advice will be appreciated, thank you all , much respect!
peace !
So i found a few fans, some of the inlines i found cudnt push up to 300 Pa & they cost more than the better competitors i will show below.
I have My 600watt with my Super Sun 2 in a 3x3x6.5 & i might use a carbon filter although smell isnt a very big issue where im going to be staying.
Fans : All 6" & based on max Static Pressure ( Pa )
HIT Series Inline : 275 cfm at 0 Pa , 0 Cfm at 350 Pa ( 90 $ Fan : 70 $ Speed controller ) Confirmed the speed controller has 8 settings
Xpelair XID 150 : 360 CFM at 0 Pa , 0 Cfm at 300 Pa ( 150 $ Fan : 100 $ Speed controller ) Confirmed the speed controller has 5 settings
Ox tube fan 150 : 315 Cfm at 0 Pa , 0 Cfm at 348 Pa ( Price : 100 $ Fan : 40 $ Speed controller) Confirmed the speed controller has 3 settings.
From the specifications ive explained plz correct me if im wrong, i know the fans still operate at something like 0.0075 cfm at their max Pa although it is necessary to describe these figures ? I just described them at 0 cfm at max Pa or is max Pa and cfm all that matter ?
HIT 150 : http://www.hydor.com.au/images/pdf/HIT.pdf Speed Controller for HIT ( REB2.5N Controller ) : http://www.solerandpalau.co.uk/docs/catalogo_general/en_665_674_acces_electrics_fid3257.pdf
XID 150 : http://www.dealec.co.uk/acatalog/pdf/xpelair/xpxid.pdf Speed Controller : http://www.qssupplies.co.uk/bathroom-furniture-shower-taps/67065.htm
Ox Fan 150 :
Link international Specification Data : http://www.ox-fan.com/Uploads/Products/decc1ae71c797cec_WY7XR.pdf
Picture Local specification Data :
As for the Ox fan, i was wondering if its from the international supplier because i looked up the specs and all of them are identical except the RPM speed & Decibels. The rpm low is higher than the rpm on High but that might just be a writing error.
So which is the better choice ?
Advice will be appreciated, thank you all , much respect!
peace !
