how do i make hash with the space case pollen press?

[Guest]

hi everyone, i just bought a cheap knockoff of the space case pollen press off of ebay. I have quite a bit of kif built up in my grinder so i can't wait till it finally arrives in the mail, but i'm wondering if anyone has any tips on how best to use it.

Obviously i know im supposed to put the kif between the two pins and screw them together, and it says to leave it pressed overnight so it can ferment, but should i do anything else like heat it up in the oven or anything? i've read about other methods of making hash and most of them say to heat it up so i guess i should do that right? and is it possible to give it too much pressure, or should i just screw it together as tight as i possibly can? also, should i add any moisture to the kif before pressing it? cuz this kif has been building up in the bottom of my grinder for the last few weeks and it's all bone dry

does anyone else have any experience with this type of hash press? did you like it? what was the hash like? did it turn out all brown on the outside like traditional hash, or was it still the regular yellowish white color of kif?

 

[igohydro]

Is it a small rectangal press,with 4 screws?
There are several popular ways of Bonding,the press sounds like the ticket.I press mine by hand,if the trics are really dry use a press or fold it into a piece of wrap and seal place in your shoe and there you go.Keep it in ther as long as needed.The heat in your shoe also the pressure will bond your trics.
Dont worry about too much pressure,the more the better as all the trics have wee heads which burst helping them to stick together.
Hope this helps!
Remember the more pressure the better!
What kind of press is it?
Dont add anything,when pressed the trics provide enough moisture!

 

[Mr.Gr33n]

i had purchased a pollen press,
it come in one piece, looks like a large battery, u can un-screw both sides,
and place product on the inside, also it came with 2 black (solid rods)

from what i gather u place ur kif between the two black rods, place on inside of shaft,
screw on both sides, thus when u screw it closed, ur applying pressure.

if its the same one,
i say throw it in the bin and use ur hands.

after wasting so much kif on this useless tool i finally caught on it was slipping down the sides of the rod.

and when i screwed closed all it did was push it down the sides and wasted 40%
ugggghhh.......

ur hands are your best tool for the job.
place in the centure of ur hand (kif)
and take ur other thumb and start to apply pressure.
after 5-10 ull see it goes like putty...

work into desired shape and your done.

no need for a modern tool.
which will work. but not as efficently as your hands.

the egyptians had the right idea.
why change what already works so well?

 

[glasspackedbowl]

dont heat in oven that will warp the metal traping those goodies inside. Use your hand. Hold it in there for 30m to 1 hour. They key to getting a solid piece of good shit is to use pure keif. Too much plant material will prevent the keif from froming into a nice solid disk.

 

[Guest]

damn that really sucks cuz u had the same kind of press as me, i hope mine isn't that shitty. it's basically like a hollow cylinder with two cyclinders inside and you put the kief between the two inner cylinders then apply pressure by screwing the lid shut. was yours a real space case or one of those cheap knockoffs? hopefully they aren't all like that.

i had purchased a pollen press,
it come in one piece, looks like a large battery, u can un-screw both sides,
and place product on the inside, also it came with 2 black (solid rods)

from what i gather u place ur kif between the two black rods, place on inside of shaft,
screw on both sides, thus when u screw it closed, ur applying pressure.

if its the same one,
i say throw it in the bin and use ur hands.

after wasting so much kif on this useless tool i finally caught on it was slipping down the sides of the rod.

and when i screwed closed all it did was push it down the sides and wasted 40%
ugggghhh.......

ur hands are your best tool for the job.
place in the centure of ur hand (kif)
and take ur other thumb and start to apply pressure.
after 5-10 ull see it goes like putty...

work into desired shape and your done.

no need for a modern tool.
which will work. but not as efficently as your hands.

the egyptians had the right idea.
why change what already works so well?

 

[Mr.Gr33n]

mine just has greenleaf pollen press on the top.
i say if its the same bin it.

aint worth the thc, or the time.

 

[glasspackedbowl]

mine was $25-30 and its the same ill take a pic and get it up on here. Mine has no markings at all.

 

[glasspackedbowl]

mine works great. I have never had stuff go on the sides mine fits pretty snug though I think its a real space case one.

 

[Guest]

ok thanks glasspackedbowl that's good to hear, hopefully mine will be like yours and not have that problem of kif falling down the sides. the little kif chamber on the bottom of my grinder is like 3/4ths of the way full right now so i keep getting tempted to smoke it but im tryin to hold out and save all of it until i get my press.

 

[Guest]

does the end product turn out all brown on the outside looking like hash, or does it just look like a bunch of kif pushed together really tight and still the same color of kif?

 

[Mr.Gr33n]

since i now press mine in my hand it looks like a black(dark brown marble)
but urs done in the case would also be same color.
aslong as isnt to much leaf or other b/s in there...

i smoked mine and was wasted for 3-4hrs, was suprised so little got me so wasted.
i just made a cone as usual with my superskunk. and then topped with skunkspecial hash....

nice comno in a big fat cone...

its well worth the effort to collect thc glands from leaf and trim also...
i just (DIY'ed) a hash collector..

and collect it on a mirror..

 

[Guest]

i leave mine in for about a day

 

[Guest]

k well i made my hash and i like it, i've been using a razor blade to cut tiny slivers off of my chunk of hash and loading them in my bowl, it's gettin me high as fuck. i've never even seen hash before now, the only things i've ever smoked before are buds, kif, and some bho i made once but the bho was made out of some mexi brickweed so i've never smoked any bho that was made from good dank (that would be way too expensive to make). but all of the kif i used to make this hash came from great dank, and it's definitely better than anything i've ever smoked before.


but it seems wierd that my hash is still the same light yellow color of the kif. all the hash that i've seen in pictures has been dark brown, at least on the outside, and they all seemed like the hash was pretty soft and mallible(sp?). mine is hard as a rock and it still has the same color as the original kif, is that how it was supposed to turn out? or is mine maybe like that because it has a lot of impurities or something? the kif looked pretty fuckin pure to me, i couldn't see any plant material or anything green in it.

 

[glasspackedbowl]

This is what my keif looks like and its %95 percent pure. One other thing u can do is put you hash in celofane(not spelled right) from a new dvd or a cigg pack. and wrap you chunk in there. THen wrap that wad up in a piece of news paper. Then wet news paper. Not too wet just enough to moisten all the newspaper. Dont worrie it wont hurt your hash. Then use the Iron and press for 15 seconds do this a few time pressing down but not too hard. In between doing that use a rolling pin or large wine bottle full(a little weight is needed) and wack and roll and press your hash piece in the Npaper. Do this properly and your hash will be a little more colored.

 

[BUDSuLIKE]

I`m with Mr.Gr33n on the tube press. Celo is the way to go for tiny shiny plates of heaven

 

[dustoff]

Lookin at presses: I see aluminum and stainless steel, brass. When heated, different expansion rates can affect tolerances. If the press is hard to turn when hot. Let it cool down before turning. Conventional wisdom says the lighter in color the better. I don't agree with conventional wisdom.

 

[tropicannayeah]

this is another thread that is/was lost in the Concentrate forum when the Hashish forum was divided into Concentrates (threads relating to soluble extractions) and Hashish (dry sift and ice water related threads)..instead of separating the Hashish forum threads into each the correct category when the split happened, the ICmag controllers decided to be lazy and just create a new Hashish forum from zero, so every thread about actual hashish (not chemical dissolved oils) since the start of ICmag 10 years ago was buried and difficult to find.

How can this be corrected so the thousands of Hashish posts are not buried and virtually lost?

 

[Frenchy Cannoli]

I press with hot water in a bottle
https://www.youtube.com/watch?v=RnkNgz6YzHM

 

[Resin23]

Your not going to warp the metal by using heat lol just don't heat it with a blowtorch. Pack it in, screw as tight as it will go, put in the oven on the lowest setting (170) for 30 mins, screw down some more and let sit overnight. Before you go to take it out put it in the freezer for a hour or so and it will come out in one nice unbroken chunk. To roughly clean the keif before pressing dump it in a shot glass of ice cold water and skim the plant material off the top of water before you pour it out, repeat, then let the keif sit out to dry.