S
Stone Skunk
Ok so I've set up my first cabinet, I guess I'll start by letting everyone know what I have so far.
The whole box is 64" H 22" W and 15" D
The flower area is 36" H
If i have to i can sacrifice veg area for more flowering room. It's not a lot of room and i hope to upgrade but this is what i have for now and what to make it as good as possible, I'll be supplying myself, girlfriend and one roommate plus the occasional friend. We smoke daily, probably a bit more than an eighth a week of good bud.
This is going to be the veg area with the power strip where everything is plugged in 5 26w cfls and 1 42w cfl you can see there in the middle. You see that little runt that i dont know why i've kept this long. That thermometer is usually down in the veg area.
Here is the flower area with my DIY bubble cloner and my shitty DIY carbon scrubber that will probably be scrapped and redone. I'm thinking of puttin g a 150 hps which i think would put me at 65.5 watts per sq.foot. My temps in the veg area are at 82 with my stanley on high. you can see my ventilation set up, air passes from the veg up through where the power strip is and then up into the flower chamber, then out the stanely. My question is will i need a cool tube or anything.
This is the intake, there is 4 holes, you can only see 3, all just over 2" in diameter. Should i add more? The stanely is rated at 2181 cfm, at bit out there, if any one knows the real cfm and can help me calculate how much intake i need and whatnot.
That's it for the cab i think.
I have 3 air stones in that bubble cloner, one 2 channel pump and another single channel. i dipped the clones in rooting powder and added like 2-3 pinches in the water. its been 5 days i think and i have very little development, if any, i cant really tell. Am I doing it right?
I think that's everything, I'll post other questions as i think of them, thanks in advance for your help.
The whole box is 64" H 22" W and 15" D
The flower area is 36" H
If i have to i can sacrifice veg area for more flowering room. It's not a lot of room and i hope to upgrade but this is what i have for now and what to make it as good as possible, I'll be supplying myself, girlfriend and one roommate plus the occasional friend. We smoke daily, probably a bit more than an eighth a week of good bud.
This is going to be the veg area with the power strip where everything is plugged in 5 26w cfls and 1 42w cfl you can see there in the middle. You see that little runt that i dont know why i've kept this long. That thermometer is usually down in the veg area.
Here is the flower area with my DIY bubble cloner and my shitty DIY carbon scrubber that will probably be scrapped and redone. I'm thinking of puttin g a 150 hps which i think would put me at 65.5 watts per sq.foot. My temps in the veg area are at 82 with my stanley on high. you can see my ventilation set up, air passes from the veg up through where the power strip is and then up into the flower chamber, then out the stanely. My question is will i need a cool tube or anything.
This is the intake, there is 4 holes, you can only see 3, all just over 2" in diameter. Should i add more? The stanely is rated at 2181 cfm, at bit out there, if any one knows the real cfm and can help me calculate how much intake i need and whatnot.
That's it for the cab i think.
I have 3 air stones in that bubble cloner, one 2 channel pump and another single channel. i dipped the clones in rooting powder and added like 2-3 pinches in the water. its been 5 days i think and i have very little development, if any, i cant really tell. Am I doing it right?
I think that's everything, I'll post other questions as i think of them, thanks in advance for your help.
