Ebb & Flo setup & sog #'s

[yn1]

I need a little help with my small setup

I'm thinking about another SOG grow under 1400 to 2000 watts in a
7'H 7' 5" x 5' 7" room with good ventilation.

I plan on making my own table

1 4x6 plywood sectioned in to 3 - 2' area's and pond liner.
3 seperate pumps and res's
I would love to do a perpetual setup It's just to much to cut all at once
If I did 4 psf I should be able to fit 32 plants in each area if my math is correct ? I'm thinking Big Bud,NL and I cant decide on the last one

Any comments welcome Good or Bad (check my math I suck)

I'm glad I found this place and everyone else

Your Neighbor

 

[highlife4me]

That would be 24 plants per 3' * 2' section How big is the actual grow space? If it is 7'5" by 5'7" then I would definitly rec. at least 2000 watts... but if your grow space is just 4' by 6' then 1000-1200 would work just fine (though nothing wrong with giving it 2000, just make sure you can control the heat). Big Bud and NL are probably fine if you are just looking for production, but there are plenty of others out there that will have higher potency and will still yield well... in fact, try so get some of BOG's new Sour Bubble (you can get it on seedbay) if you want something that should be extraordinary! So do you have a camera to take pictures and provide us with a nice grow journal? Good luck, one way or another.

 

[yn1]

Thanks highlife4me I need to clarify what I said because I think you misunderstood the size of the table or I just dont understand

The table will have three 2'W x 4'L sections, how did you work out the plant #'s?
The room is 7' High x 7' 5" length x 5' 7" wide

I'm not looking for production I supply one MS patient, myself and wife and need to shutdown during summer at some point. I'v read that Big Bud and NL are good for SOG.

I'v had 2 good dirt grows but it's to much dirt

Yes I have a digi cam and will post

Thanks again for the help

 

[highlife4me]

I did indeed misread your original post; I thought you were doing 3' by 2' sections, not 3 2' sections lol However, since you did mention you'll be growing for a medical user I would rec. looking into strains that work the best for medical users... not strains specifically good for SOG (which you can MAKE any strain good for, just by how soon you flower the clones and how far apart you put them). Do a post directed at medical users and find out what they like to smoke for their conditions, then decide on which strain/s to grow. Once again, good luck =)

 

[Maddlights]

Sounds like a solid approach. How plan to support it? Remember water weights 8 lbs to the gal. and will bow an unsupported sheet of 3/8" plywood. I built a great table using hollow core doors as the base and I was able to support the table on the ends. This gave us the room under the table for a rolling reserve

 

[Your Neighbor]

I plan on supporting it with 4 sawhorses and 3/4" to 1" plywood If that doesnt hold it I will add another peice of plywood or some 2x4's

The place is set up and ready to go just need a little more staples/tape for light leaks & do a temp check again and I can start

My biggest problem is after reading post's by people like So quick and Hog etc
I cant decide how I want to grow Buckets or table?

So until I decide on style It all could change

YN

 

[BigToke]

My biggest problem is after reading post's by people like So quick and Hog etc
I cant decide how I want to grow Buckets or table?

Ya now there’s a real problem you got there!! :wink: