hey guys! its The Dopest, back with another DIY! this time i needed a drying cab because screens lying all over the computer room with bud on them not only looks bad but smells bad!
this is a Workforce 30" storage cabinet from home depot $79. 
i began by cutting a starter duct into the rear at the height of the carbon filter inside and traced out the 20"x20" house filter on the back to cut later.
here i cut within the boundaries of the filter about 1-2" and left strips for support across the middle.
this shows the filter and duct taped securely to the cab
inside i sat the DIY filter/stanely fan combo and taped the exhaust to the starter duct
the filter is 24" tall by 12"diameter and has a 3" bed of activated carbon pellets weighing in at almost 40lbs
here, i cut out between the supports on the shelves and added 1/4" hardware cloth mesh to the tops for ventilation so they can be used for drying popcorn buds or branches and whole plants or branches can be hung from the shelves easily...whew that runon sentence got away from me
top shelf is my jar collection, the bigass filter was used because the drying cab is in my veg/smokin room and it takes care of all the smells
