Cool Tube Cord...

[Guest]

what do you guys do with the cord that goes to the modul when you have ducting on both ends of the cool tube? I was thinking about this today

 

[Guest]

I just cut a hole in the ducting ran it through, and sealed it up with aluminum tape.

 

[NiteTiger]

Just go around

 

[Guest]

the aluminum tape sounds like a good idea...NICE

 

[Sauce]

I got a fat cord coming off of mine and just cut a hole in the reducer and then added tape over. My mogul base is still on which kills airflow but I didn't want to rewire my lamp.

Aluminum tape is very nice to have for many situations. It's really strong and reflective.

 

[AlexanderS]

you could run it thru the duct or cut a hole and just seal it, long as its air tight wont matter too much.

 

[Guest]

i just ran it thru the ducting and then taped around the hole...pics coming sooon~~~

 

[bostrom155]

Here's what i did

 

[Guest]

I like how you made the fixture easy to get to. Now that i'm having to work on mine, i'm dreading tearing it apart to get to that.

 

[bostrom155]

I like how you made the fixture easy to get to. Now that i'm having to work on mine, i'm dreading tearing it apart to get to that.

Yea but the other way is easier for cleaning the glass, but because of the light pattern this is better

Had it this way before

 

[Guest]

I have ducting on both ends, so i can get the end far enough for the intake to create the best airflow. It is a pain in the ass though (have to stick my arm down the ducting to reach the bulb), and I used alluminum tape so that I wouldn't break the glass, but this stuff naver wants to come back off once it's taped down.