Cloner

[Epod]

Hi all what's the best temperature for the res to be in a cloner and is the water ment to hit the stems of the clones or just splash them as I just changed my spray heads to 360degree spinners so there not much upwards flow more sideways and r u using a big ass airstone in it as well

 

[Epod]

New cloner

New cloner

hi all I just changed my cloner do u think this is ok or to fierce or do u think it is ok

 

[fuzzdog]

70 degrees....steady.. Thats EZ Cloner's, recommended water temp

pull out one of the plugs on top, while its running... if you have good "fine" spray shooting out the opening... your good to go... direct or splash...no matter... both work... its about size of drops.

use the biggest... baddest...... air pump you can throw down... in my opinion... of course..

 

[fuzzdog]

ur layout looks okay...

like i mentioned earlier..... pull out each plug... while its running, make sure you have spray at each opening.... that done........you should have no problems... at least with equipment..

 

[Crusader Rabbit]

What is the material you used to make the top?

 

[Epod]

thanks for the reply Fuzz I will add a 100x50mm air stone to it then and a good pump rabbit this stuff http://www.ebay.co.uk/itm/White-Per...240?pt=LH_DefaultDomain_3&hash=item4aa5534338

 

[Epod]

all set for my clones now I added a second air stone so 2 x 100x50 but being fed by a 2000lh pump = 33.33lm as I only needed 15lm on my 30l res and they r on a 10mm feed so lots of air now water has been shocked with 2.00ppm of chlorine just waiting for it to fall back now before I set them up

 

[RonSmooth]

I have never measured the temps in my home made bubble cloner. I would say "room temperature" Maybe 70?

I like the idea of the sprayer nozzles and a fine mist. I have high success rates with just the air stone. Some strains/cuts take linger than others but I rarely dont get roots.

Do you use an air stone, an air pump, a water pump and tubing with spryer nozzles?

Wouldn't the spraying do the same thing as the air stones?

 

[Epod]

I have never measured the temps in my home made bubble cloner. I would say "room temperature" Maybe 70?

I like the idea of the sprayer nozzles and a fine mist. I have high success rates with just the air stone. Some strains/cuts take linger than others but I rarely dont get roots.

Do you use an air stone, an air pump, a water pump and tubing with spryer nozzles?

Wouldn't the spraying do the same thing as the air stones?

Yes Ron I do use them all to keep the rez right + chlorine @ 0.5
checked every 5 days for chlorine levels

 

[Epod]

cutting taken yesterday Ron u can see they are happy Pic's are one day apart

 

[RonSmooth]

they look great.

is that just for cloning or do you grow them out in that?

 

[Primalraindrop]

these may take longer. they look like they are in flower. or showing signs of sex. be patient

 

[Primalraindrop]

Looking AWESOME !!!! just thought i would throw that in there as well!

 

[Epod]

yes they r in flower and will revert back and go crazy with new branch growth I have been doing like this for a few years now
a pic for a older crop done the same way popcorp bud bursting

 

[Epod]

follow the link to see a how grow all popcorn buds reverted