C22 Question...

[Guest]

ive got it figured out

 

[ft100]

you want to be running at least a 400 in a c22. some run air cooled 600s. 150 would be wasting your time imho i grow in a c13 which is the c22s little brother i guess and that makes the c4 the little sister but that is beside the point. go with a bigger watt light like a 4 or 6, get an inline fan at least 256 cfm get some darkroom louvers for passive intake, air cool the light with a hydrofarm daystar ac with glass, hook a carbon scrubber up to the exhaust fan and bam. your set up

 

[Guest]

you want to be running at least a 400 in a c22. some run air cooled 600s. 150 would be wasting your time imho i grow in a c13 which is the c22s little brother i guess and that makes the c4 the little sister but that is beside the point. go with a bigger watt light like a 4 or 6, get an inline fan at least 256 cfm get some darkroom louvers for passive intake, air cool the light with a hydrofarm daystar ac with glass, hook a carbon scrubber up to the exhaust fan and bam. your set up

Agreed.

I have a C25 and a 400w.

150 would be a nice veg/clone cab bulb though.

(i currently run 4 x 2ft flouros in a shop lamp)

 

[bostrom155]

Is it possible to fit all of these INSIDE a c22?

Yes, this is an old pic, you cab add a ton of shit, just draw it up and fit it in. I added another 150HPS on the left. I have a 400 in the middle and on the right is a 150. Four foot tubes are gone. Have fun

 

[Where'sMyBud?]

Too much...

Do 1 high cfm fan and a large carbon scrubber and an air cooled reflector instead. Here:

 

[Guest]

hmm, seems we have mixed opinions. are both these cabs c22's? the one looks bigger...

 

[ft100]

the c22 is the cab in question. it is the bigger one. go with my previous advice youll be fine

 

[Guest]

i thought the c24 was the biggest of mills pride?

 

[bostrom155]

22 is the older model, 24 in the newer one. basically the same. 13 is 25 i think

 

[Guest]

i thought the c24 was the biggest of mills pride?

its only half the size of (2) c24 cabs built "face to face"

-with no doors...ya dig?

-you put the cabinets on BIG "castor wheels"

-hinges on one SIDE

-latches on the other SIDE (so it rolls open)

you can put all your regular equipment in there...(mine is gonna have (2) 400 watts hps (cool tubes...yada yada yada)

-u can also segregate the sides if ya want/need to

-u can do the same thing w/ (2) c13's or (2) c4s

-putting the two together is actually easier than trying to fit/adjust those stupid fukin doors and hinges.....and seal all the light leaks when u do get them figured out.

ill post pics when mine is done

 

[Guest]

They do sell these 'closets' in the canadian home depots right? i went looking and didnt see them...

 

[Guest]

hello?

 

[bostrom155]

Call and ask. Mills Pride C-22, you were thier way didn't you ask?

 

[Guest]

I'm sure that they do...and if not the mills pride version, I can pretty much guarantee that the will have something extremely similiar

I think "ikea" is a similiar type cabinet avail. outside of the US.