As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together!
Join ICMag Discord here!
More details in this thread here: here.
The box I have is very solid with a lock on the door and spring loaded hidges for easy maintenance. The door comes off and goes on very quick. I'm using a 1000 watt switchable ballast, air cooled hood,and a carbon filter with a 400 cfm fan. I'm using a a/c unit vented into the box to bring heat levels down remember I'm using a 1000 watt in a 4x 20"x7 scrog area.i will be finishing it up tomorrow. Growing method is a dwc system with a 1157 four valve air pump.strain I will be frowning is female bubblious auto paradise seeds,bombs female thc bomb auto .
Are you worried about light bleach in such a small area with a 1k? You said your using forced a/c have you done test run for temp? It seems like a little over kill why not a 600w instead you'll get more then enough watts per sq. ft.
I had to turn the box into two sections one for cloning and one for begging. I took out the hid and put led and flos in it. In Florida the heat was way to much. I mad a flower room in a 6x2x10 closet with a great exhaust going a very good negative pressure to get the heat out.the box would have worked if I was in a cool environment.100 degree weather here .i must say I had a very bad flaw I was not venting the hot air out side but just out side the box which even made it hotter.i was a nice try and it didn't work. But it's better as a two stage set up anyway .I can keep a cycle going now
Yeah, that works out to 149+ watts/sq ft., double the light needed. Even 600 gives you almost 90w sq ft. A 400 w gives you about 60 which is good. I like that cabinet and the rest of your set up. Where'd you get it and how much was it. Good luck. -granger