I am building a room that is 16x11x8ft in my garage. Just a drywalled room basically. What i am looking for is maximum yeild. I have done a bunch of sketches using google sketchup but could use some advice on what reflectors to use, air cooled? What size to make the beds? The weather here might allow me to go non air cooled. Max temp in summer is about 75, gets down to mid 30's in winter. My 10x12 room has 6x1000 hps, with agrotech hoods and ggh ballasts stays around 80 degrees, but i have 2 oscillating fans that i took apart that blow air up from under the room. I pull between 6-8lbs in this room.
So basically, what reflectors should i go with. I was thinking of making the beds or stands depending on which way i go about 5ft wide and putting some magnum xxxls 8's in there. 3 along 1 wall, then use 2 blockbuster 8's on the other wall where the beds would only be about 3ft 6in.
Thanks for any help.
So basically, what reflectors should i go with. I was thinking of making the beds or stands depending on which way i go about 5ft wide and putting some magnum xxxls 8's in there. 3 along 1 wall, then use 2 blockbuster 8's on the other wall where the beds would only be about 3ft 6in.
Thanks for any help.
