What's new
  • As of today ICMag has his own Discord server. In this Discord server you can chat, talk with eachother, listen to music, share stories and pictures...and much more. Join now and let's grow together! Join ICMag Discord here! More details in this thread here: here.

8x10 veg annd flower room

sherm

Member
hello all ,I have a 10x20 shed that I just had some people sprayed with foam today.(ouch) . I am putting a wall up 8 foot from the back wall with a door ..the 8x10 I will make both flower 7x8 room and the mother room 3x8.with a wall and door to separate the rooms .
I am putting up 1/2 inch plywood on the walls and 3/8 on the ceiling .
I have a 60 amp breaker I am hooking up at the pole and running 220 to the room to a breaker box where it will drop down to 110 .
The mother room will have 2 florescent lights 2 ft and a 600 mh air cooled hood .
The flower room I have a 600 air cooled hoods hps and a titan Saturn 3 controller . .the titan controller run a fan ,dehumidifier /humidifier and co2 and I also have the aux heater and high temps shut off with the plug in's with the phone cord connector .(really don't think I will need the heater )...I have a small bottle of co2 and regulator and a 30 qt dehumidifier (will hard line outside).
I will be running water to the building also .
I will be running a rcdwc . I don't know how many buckets I will be running yet.
I (HOPE) to run a sealed room without a/c and no air exchange .(only exhaust air at night)

Can any one tell if I forgot anything or if you can think of something else or if my plan sounds flawed.
ANY HELP IS GREATLY APPRECIATED.. Thank you
 

Granger2

Active member
Veteran
I have 2x4 construction, all screws for my grow stalls. With a frame that won't move AT ALL if I did pull ups, I used cheap paneling, and thin plywood. Works great and is cheaper, less labor and easier to work with. Good luck. -granger
 

J-zee

Member
Im almost done with mine, its hot here so i went a little over the top but i want to play god to my plants. I went 2x4 with screws. 1.5" styro foam board on inside, on the out side i used liquid nails and staples to plastic to eliminate air leaks and bugs getting in. Then i used rolled insulation the a black plastic over that. Not sure if im gona do co2 but im pretty air tight if i wanted to. I mostley wanted air to come in where i choose and go out where i choose. Last room i threw up had air leaks and i got pm from lack of air movement. Plus the heat i gotta keep out, it gets to 112 def (f) here.
 
Top