Hi IC community 
Gonna pick back up from my snypettes world thread. Hope everyone is doing well
So i bought my first house. It had no water, no working plumbing, and about 50 other problems when I moved in. I now have basic function in the house.
I am constructing a 4000W room completely by myself. I dont even have an extra set of hands. It has been quite an experience! Holding up strapping with my head to be able to drill it in and such. Far from home..I am getting hermit syndrome
. So i have an 18,000 btu window ac that i modified. Hopefully no light will be seen outside. But I wont know until I get these lights running. I would really appreciate some help on that note. I have a dryer outlet with 10-3 wire running on a 30 amp double breaker. I want to connect my cap mlc-4x light controller to the dryer outlet. The dryer wire has a black, red, and gold wire, which i see in the cap instructions. It also has a white wire. Should I cap the white wire and just leave it inside the wall? Cap it inside the controller box? And as far as all the wires go... is there some special tool to snip them? Im kind of affraid I'm gonna burn my house down guys
I have 4 120/240 phantom ll ballasts. The light controller instructions say to make sure my ballasts are wired for 240 and not 120. Does anyone know which way the phantom ll dimmables are factory wired? Or are they wired for both and you just use the plug you need?
Here is the dryer 10 -3 wire:
And here is the room:
Gonna pick back up from my snypettes world thread. Hope everyone is doing wellSo i bought my first house. It had no water, no working plumbing, and about 50 other problems when I moved in. I now have basic function in the house.
I am constructing a 4000W room completely by myself. I dont even have an extra set of hands. It has been quite an experience! Holding up strapping with my head to be able to drill it in and such. Far from home..I am getting hermit syndrome
. So i have an 18,000 btu window ac that i modified. Hopefully no light will be seen outside. But I wont know until I get these lights running. I would really appreciate some help on that note. I have a dryer outlet with 10-3 wire running on a 30 amp double breaker. I want to connect my cap mlc-4x light controller to the dryer outlet. The dryer wire has a black, red, and gold wire, which i see in the cap instructions. It also has a white wire. Should I cap the white wire and just leave it inside the wall? Cap it inside the controller box? And as far as all the wires go... is there some special tool to snip them? Im kind of affraid I'm gonna burn my house down guysI have 4 120/240 phantom ll ballasts. The light controller instructions say to make sure my ballasts are wired for 240 and not 120. Does anyone know which way the phantom ll dimmables are factory wired? Or are they wired for both and you just use the plug you need?
Here is the dryer 10 -3 wire:
And here is the room:
