Egzoset
Member
Salutations,
This is a multi-part nostalgia thread meant to share perspective which was acquired after being inspired by discussions on cannabic vapour conditioning, 6 years ago: on temperature, filtering, water glassware, cotton, etc...
In the begining i depended on my HerbalAire v2.1 as the dry-flowers extraction engine, it provided both a convenient Inlet and outlet tubing connector system allowing complex attachments, including an aquarium pump and bags.
This logo below illustrates how my "FogBong!" cannabic path passed through a cavity filled with cold fog generated by some water-immersed Mist-Maker:
Such long path wouldn't have worked for "light" scenarios i guess, it was more suitable for party situations but still proved useful by showing that fog conditioning was so potent it actually required strict mixing control, for which i was lucky enough to find components that suitably fit together to realize an efficient implementation:
Sorry if that looks too specific but my point is that this Ultrasonic Fog generator had an aperture closely matching the diameter of a soft-drink bottle as pictured next:
Appreciate its relative simplicity; mostly unassembled above, partly assembled below:
No doubt a manufacturer would manage to make it a lot shorter, don't hold your breath for a portable version just yet...
M'well, in any case i found even a tiny aperture translated into a huge gain in terms of comfort. Not to mention comparison couldn't be made more straightforward as it only required this sliding "Shutter" to completely obstruct its associated "Mixing Aperture" in order to provide a 100 % dry version of my "fumet":
E.G. open aperture to "condition" cannabic vapour, or just close to cancel. Everything else remains equal, hence the measured effect is fog-related indeed.
{ Continues next... }
This is a multi-part nostalgia thread meant to share perspective which was acquired after being inspired by discussions on cannabic vapour conditioning, 6 years ago: on temperature, filtering, water glassware, cotton, etc...
In the begining i depended on my HerbalAire v2.1 as the dry-flowers extraction engine, it provided both a convenient Inlet and outlet tubing connector system allowing complex attachments, including an aquarium pump and bags.
This logo below illustrates how my "FogBong!" cannabic path passed through a cavity filled with cold fog generated by some water-immersed Mist-Maker:
M'well, in any case i found even a tiny aperture translated into a huge gain in terms of comfort. Not to mention comparison couldn't be made more straightforward as it only required this sliding "Shutter" to completely obstruct its associated "Mixing Aperture" in order to provide a 100 % dry version of my "fumet":
{ Continues next... }
Last edited: