שרשור חוסרים במינרלים - לינקים, הסברים ותמ&#14

שרשור חוסרים במינרלים - לינקים, הסברים ותמ&#14

שלום חברים

אני מקבץ פה לינקים להדרכה על צמחים עם מחסור במינרלים. לחלקם אני מוסיף תמונות מהניסיון שלי

חשוב לי להדגיש, שאין תמיד אמת אבסולוטית, ויש לי תחושה שחלק גדול מהמידע פשוט עובר מפורום לפורום, כשכל אחד עושה קופי-פייסט כולל תמונות. מספיק שאיזה מגדל בחו"ל העלה תמונה מוטעית של משהו, ועד היום כולם הולכים אחריו.

התמונות שלי הן על פי דיאגנוסטיקה שלי, בהתאם למה שקראתי בלינקים כאן

המאמר המקיף ביותר לדעתי נמצא ברולאיטאפ, ואני מעתיק ממנו בהמשך השרשור

http://www.rollitup.org/marijuana-plant-problems/398955-gude-sick-plants-ph-pest.html

לינקים נוספים:
https://www.icmag.com/ic/showthread.php?t=11688

http://www.420magazine.com/forums/how-grow-marijuana/71664-plant-abuse-chart.html

http://www.rollitup.org/marijuana-plant-problems/488004-guide-nutrient-deficiency-toxicity.html

http://www.rollitup.org/marijuana-plant-problems/157345-have-plant-problem-check-here.html

http://www.weedfarmer.com/cannabis/tables_guide.php



וזה בעברית, אבל עם תמונות של צמחים חלופיים
http://www.hydrogrow.co.il/content/21663



מדריך מהיר על רגל אחת

Quick Deficiency Guide

Nitrogen: Entire plant is light green in color; lower leaves are yellow; growth is stunted....

Phosphorous: Entire plant is bluish-green, often developing a red or purpleish cast; lower leaves may be yellow, drying to a greenish-brown to black color; growth may be stunted...

Potassium: Leaves have a papery appearance; dead areas along the edges of leaves; growth is stunted...

Magnesium: Lower leaves turn yellow along the tips and margin and between the veins; the lower leaves wilt...

Calcium: Young stems and new leaves die...

Zinc: Leaf tissue between the veins is lighter in color; yellowed; papery in appearance...

Iron: Leaf tissue appears yellow, while the veins remain green...

Copper: Leaf edges appear dark green or blue; leaf edges curl upward; young leaves permanently wilt...

Sulfur: Young leaves turn pale green, while the older leaves remain green; plant is stunted and spindly...

Mananese: Growth is stunted; lower leaves have a checkered pattern of yellow and green...

Molybdenum: Leaves are stunted, pale green, and malformed...

Boron: Young leaves are scorched at tips and margins...





אני מוסיף לכאן את ההקדמה מהלינק ברולאיטאפ

I GOT FROM A FEW SORCES AND MY PERSONAL EXPERIENCE HOPEFULLY IT CAN HELP READERS GET THE MOST OUT OF THEIR PLANTS AND HELP SOLVE ANY PROBLEMS
When you do post please give as much detailed information as possible to faster get your diagnosis.


ARE YOU USING?

SOIL:

How long has this problem been going on?

What STRAIN are you growing?

What was the establishing technique? (seed or clone?)

What is the age of your plants?

How long have they been in the soil mixture they are in now?

How Tall are the plants?

What PHASE (seedling, vegetative or flower) are the plants in?

What Technique are you using? (SOG, SCROG etc)

What size pots are you using? (Include how many subjects to pot)

What substrate/medium are you using? What brand of soil mixture
are you using?(percentage of perlite, vermiculite...etc?)

What Nutrient's are you using?

How much of each nutrient are you using with how much water? *Knowing the brand is very helpful*

How often are you feeding?

If flowering, when did you switch over to using Bloom nutrients?

What order are you mixing your nutrients? (example: veg nutes 1st, bloom 2nd ect)

What is the TDS/EC/PPM of your nutrients used?

What is the pH of the "RUN-OFF"?

What method of pH test was administered? Using Strips? pH pen?

How often are you watering?

When was your last feeding and how often are you feeding?

What size bulb are you using?

What is the distance to the canopy?

What is your RH Factor? (Relative Humidity)

What is the canopy temperature?

What is the Day/Night Temp? (Include fluctuation range)

What is the current Air Flow? (cfm etc.)

Tell us about your ventilation, intake exhaust and when its running and not running ?

Is the fan blowing directly at plants?

Is the grow substrate constantly wet or moist?

Is your water HARD or SOFT?

What water are you using? Reverse Osmosis (RO)? Tap? Bottled?

Well water? Distilled? Mineral Water?

Are you using water from a water softener?

Has plant been recently pruned, cloned or pinched?

Have any pest chemicals been used? If so what and when?

Are plant's infected with pest's?


HYDROPONICS/Aero Ponics/Coco/Soiless/
How long has this problem been going on?
Are you growing in a PVC grow tent? (example: Hydrohut or any other non brand tents)
What system are you running? (DWC? Ebb flow? Aero? Water Farm? Flood Tables? and so on...)
What STRAIN are you growing?
What was the establishing technique? (Were the seed or clone?)
What is the age of your plants?
How long have they been in there mixture they are in now?(coco,soiless etc..)
How tall are the plants?
What PHASE are the plants in? (seedling, vegetative or flower) are the plants in?
What Technique are you using?
What substrate/medium are you using?(Hydroton, RockWool etc.)
What is the Water temperature?
What color are your roots? White? Brown? Are your roots slimy?
What Nutrient's are you using?(If growing soiless)
How much of each nutrient are you using with how much water? *Knowing the brand is very helpful*
How often are you feeding? (If using soiless)
How often are you giving nutrients? (If using soiless)
If flowering, when did you switch over to using Bloom nutrients?
What order are you mixing your nutrients? (example: veg nutes 1st, bloom 2nd ect)
What is the TDS/EC/PPM you are using?
What is the pH of the "Tank"?
Are you sure your calibration is correct on your equiptment?
When was your last watering?
What is your water temps?
When was your last feeding change? (ie. grow-bloom-micro-additional)
How often do you clean your system: example: Flush out water replace with clean water and nutrients?
What size bulb are you using?
What is the distance to the canopy?
What is your RH Factor(Relative Humidity)?
What is the canopy temperature?
What is the Day/Night Temp? (Include flucutaion range)
What is the current Air Flow? (cfm etc.)
Tell us about your ventilation, intake exhaust and when its running and not running ?
Is the fan blowing directly at plants?
Is your water HARD or SOFT?
What water are you using? Reverse Osmosis (RO)? Tap? Bottled? Well water? Distilled? Mineral Water?
Are you using water from a water softener?
Has plant been recently pruned, cloned off of or pinched
Have any pest chemicals been used? If so, What and When?
Are plant's infected with pest's


I have been doing a lot of research on sick plants and also helping out others a lot on sick plants!
Most of the stuff I have learned is from others and keeping up to date on there problems they are having. Some I have learned on my own, the sick plant troubles I have had was ph troubles! I didn’t really think the importance of how ph plays a role with your plants being healthy or dead.
I honestly think one of the most important parts of your growing is having a good solid ph tester, a digital one is the best to have. There are other ones you can buy as well, liquid ph test kits are inexpensive and get the job done if you can't afford a digital ph meter, STAY AWAY FROM SOIL TESTERS, they don't do the job and are not very accurate at all. Ph test strips work well, even if you are on a budjet! So if you rely on a soil tester and its tell you your soil is 7 and your having problems, 9 times out of 10 it's going to be your water ph that is messing up the soil ph check the water you are using. Unless you are using additives in your soil mixture like blood bone meal, and Peat moss those will throw your ph off too.
Adding nutes to your water can cause the ph to get low as well, so its best to test your ph of your water before and after you add your nutes. Nutrient deficiencys are mostly caused by human mistakes,along with to much or to little of the amount of nutrients available. The best range for nutrients to be absorbed is between a pH of 5 and 7 and a (TDS) range of 800 to 3000 PPM.
Having these conditions will help making nutrient deficiencys alot easier to overcome.

Well this guide I am making on sick plants is going to be very detail in helping out as many as possible… I have collected a lot of accurate data and have been putting it together piece by piece… Stuff on what kinda of nutrients can lead to locking out other nutrients as well….
I will be updating this until it gets done, because I have a lot of information but just not on every sick problem that is out there….





Mobile Elements are mostly going to affect the older leaves first then work its way to other leaves and then the nutrients will be taken from old leaves to newer growths…
The following are mobile elements and as well macro nutrients.
First off, we are going to start out with Nitrogen

ניטרוג'ן N חנקן


Nitrogen (N) Mobile Element and Macro Element

Benefit: Nitrogen plays a very big role in your plants; this one element is directly responsible for production of chlorophyll, photosynthesis, Amino Acids, which are the building block of Proteins. The myriad of enzymes which help the plants growth in leaves stems and the how well the vigor of your plants is.

Nitrogen is the biggest mobile element meaning it can travel anywhere on the plant.
Usually the def will start on the lower to middle part of the plant, and then will usually happen to older leaves first. Then the deficiency will work its way up the plant. Your plant can be green on top, then yellowing on the lower leaves when the deficiency is starting out. Yield will be greatly reduced without good amounts of nitrogen in your plants. Sometimes in bad cases the leaves will turn a purplish color along with the yellowing.

Unlike a magnesium deficiency, nitrogen def will start from the tips and work its way back to the leaf node. Nitrogen and Magnesium get confused. The best way to tell them apart is, nitrogen deficiency starts around the tips and works its way to the back of the leaves, where a magnesium deficiency will cover the entire outer part of the leave and make the entire leaves yellow leaving the veins to stay green. If your plants are having a slow growth rate and have yellowing of the leaves, then most likely it’s a nitrogen deficiency.
Towards the middle to end of flowering stages, the plant will show a nitrogen deficiency almost always. This process is completely normal and just let the plant naturally yellow out as it uses it's stored nutrients. This actually helps you by getting ready for final flushing and then harvesting. At this point DO NOT not use nitrogen to fix the problem. The yellowing leaves will then eventually drop off after the plant is done with them.

Parts affected by a nitrogen deficiency are: Older foliage, going to whole plant, Petioles (rare) cases.


Now for having too much nitrogen in your growing mediums or soil. The plant will have like an overall DARK green look and have delayed maturity. Due to Nitrogen being involved in vegetative growth, to much nitrogen will result in tall plants with weak stems. New growth will be very lively and plant transpiration will be high, but not always. Nitrogen toxicity can be seen when there are very very dry conditions almost as if there was a drought, which may show a burning effect. If you give your plants ammonium based nutrients they may show NH4+ toxicity, which will show a smaller plant growth and lesions that occur on stems and roots, leaf margins that will roll downward. Also the big fan leaves will have “the claw” look. The tips will point down but the leaves will stay up as if when you bend your fingers downwards. Leaves can be twisted when growing… mainly new growths. Roots will be under developed along with the slowing of flowering. Yields will be decreased, because to much nitrogen in early stages of flowering slows down bud growth. Water uptake is slowing down from the vascular breakdown of the plants as well. Too much potassium and nitrogen will lock out calcium as well.


Problems with Nitrogen being locked out by PH troubles.
Waterlogged soil and Soil with low organic matter.

Nitrogen is a very important element in the plant, all of them are but some are more important than others. For soil the best ph to have is 6.8. Why? Because at 6.8, that’s the best number for ALL available nutrients to be absorbed into the plant without any of them being locked out. For hydro and soil less mediums best ph to have is around 5.8.
Try not to keep your plants to cold, because the cold temps will cause the nitrogen harder for the plant to be absorbed.

PH levels for Nitrogen:

Soil levels
Nitrogen gets locked out of soil growing at ph levels of 4.0- 5.5.
Nitrogen is absorbed best in soil at a ph level of 6.0-8.0. ( wouldn’t recommend having a ph of over 7.0 in soil) best range to have nitrogen is a ph of 6-7. Anything out of that range will contribute to a nitrogen def.


Hydro and Soil less Mediums
Nitrogen gets locked out of Hydro, Soil less mediums at the levels of 4.5-5.0.
Nitrogen has the best absorption rate at a ph of 5.5 to 8.0
(Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range to have Nitrogen is: 5.0-7.0. Anything out of that range will contribute to a nitrogen def.


Solution to fixing a Nitrogen deficiency

Avoid excessive ammonium nitrogen, which can interfere with other nutrients. Too much N delays flowering. Plants should be allowed to become N-deficient late in flowering for best flavor.
A goof solid N-P-K ratio will fix any nitrogen deficiency. Any chemical or organic fertilizers that have Nitrogen in them will fix a nitrogen deficiency., Peters all purpose plant food 20-20-20 is good, Miracle grow All purpose plant food, Miracle grow Tomato plant food, (Only mixing at ½ strength when using chemical nutrients, or it will cause nutrient burn!) as well and blood meal! If you need to give your plants a quick solution to nitrogen and you want to use blood meal, I suggest making it into a tea for faster use, where blood meal is slow acting, but when made into a tea it works quicker! Other sources of nitrogen are dried blood, Cotton seed meal which is slow acting, Insect eating bat guano which is fast acting. Bone meal which is a gradual absorption when not made into a tea.( also excellent source of phosphorus). Fish Meal Or Fish Emulsion is a good source of nitrogen and is medium acting. Worm castings, which is gradual absorption. Seabird guano, All purpose Millennia Seabird guano, Orginal Seabird guano All Purpose, Crabshell ,which is slow absorption. Fox Farm Grow Big, which is fast acting. ( can bring down your ph as well)


Nitrogen deficient plants usually recover in about a week, affected leaves will not recover.


Now if you added to much chemical nutrients and or organics, (which is hard to burn your plants when using organics) you need to flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients. Soluble nitrogen (especially nitrate) is the form that's the most quickly available to the roots, while insoluble N (like urea) first needs to be broken down by microbes in the soil before the roots can absorb it.


Note: Blood Meal, Dried Blood, Guanos, Kelp Meal, Cotton Seed Meal, Peat Moss, Sulfur and fish meal are all acidic and can bring your ph down, so if you add these please monitor your ph when using those.

Note: Bone Meal, Rock Phosphate, Wood Ashes pretty much all ashes, Shellfish Compost and Crab Meal are all alkaline and can make your ph go up, so if you add any of these please monitor your ph.


Here are 3 pics of what a nitrogen def looks like.... the first one is a nitrogen deficiency in vegging. the 2nd picture is nitrogen def in flowering; THis is completely normal for mid to late flowering; as you would want your plant to naturally yellow at the end. DO NOT add nitrogen supplement to fix the problem; just let the plant yellow as cannabis does towards the end of flowering. The last picture is one that is caused by TO MUCH Nitrogen.

אני מוסיף כאן תמונות שלי

P זרחן פוספורוס

Phosphorus (P) Mobile Element and Macro Element

Benefit: Phosphorus does a lot of things for the plant. One of the most important parts of Phosphorus is: It aids in root growth and influences the vigor of the plant and is
one of the most important elements in flowering as well helps to germinate seedlings.
Phosphorus is an essential plant nutrient, and since it is needed in large amounts, it is classified as a macronutrient. Phosphorus is a MAJOR important nutrient in the plants reproductive stages. Without this element the plants will have a lot of problems blooming without proper levels of Phosphorus.


When your plants are deficient in phosphorus, this can overall reduce the size of your plants. Not enough causes slow growth and causes the plant to become weak, to little amount of Phosphorus causes slow growths in leaves that may or may not drop off. The edges all around the leaves or half of the leaves can be brownish and work its way inwards a bit causing the part of the leaves to curl up in the air a bit. Fan leaves will show dark greenish/purplish and yellowish tones along with a dullish blue color to them. Sometimes the stems can be red, along with red petioles that can happen when having a Phosphorus deficiency. This isn’t a sure sure sign of you having one though, but can be a sign. Some strains just show the red petioles and stems from its genes.
So pretty much the overall dark green color with a purple, red, or blue tint to the fan leaves is a good sign of a Phosphorus deficiency. Having Cold weather (below 50F/10C) can make phosphorous absorption very troublesome for plants.
Many people get a Phosphorus deficiency confused with a fungus problem because the ends of the leaves look like a fungus problem, But the damage occurs at the end of the leaves. side of the leaves and has a glass like feeling to it as if it had a ph problem. Parts affected by a phosphorus deficiency are: Older Leaves, Whole plant, Petioles.

Too much Phosphorus levels affect plant growth by suppressing the uptake of: Iron, potassium and Zinc, potentially causing deficiency symptoms of these nutrients to occur def in plants. A Zinc deficiency is most common under excessive phosphorus conditions,
As well as causing other nutrients to have absorption troubles like zinc and copper. Phosphorus fluctuates when concentrated and combined with calcium



Problems with Phosphorus being locked out by PH troubles
Cold wet soils, acid or very alkaline soils, compacted soil.


Soil

Phosphorus gets locked out of soil growing at ph levels of 4.0-5.5
Phosphorus is absorbed best in soil at a ph level of 6.0-7.5 (wouldn’t recommend having a ph of over 7.0 in soil) Anything out of the ranges listed will contribute to a Phosphorus deficiency.


Hydro and Soil less Mediums

Phosphorus gets locked out of Hydro and Soil less Mediums at ph levels of 6.0-8.5.
Phosphorus is absorbed best in Hydro and Soil less Mediums at ph levels of 4.0- 5.8. (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a Phosphorus Deficiency.



Solution to fixing a Phosphorus deficiency
Some deficiency during flowering is normal, but too much shouldn't be tolerated. Any chemical or organic fertilizers that have Phosphorus in them will fix a Phosphorus deficiency. If you have a phosphorus deficiency you should use any N-P-K ratio that is over 5.Again Peters all purpose 20-20-20 is a good mix. Miracle grow Tomato plant food, Miracle grow All purpose plant food (Only mixing at ½ strength when using chemical nutrients, or it will cause nutrient burn!) Other forms of phosphorus supplements are: Bone meal, which is gradual absorption, I suggest making it into a tea for faster use, where bone/blood meal is slow acting, but when made into a tea it works quicker! Fruit eating bat guano, which is fast absorption, Worm castings, which is gradual absorption, Fish meal, which is medium absorption, Soft Rock Phosphate, which is medium absorption, Jamaican or Indonesian Guano, which is fast absorption. Crabshell, which is slow absorption. Tiger Bloom , which is fast absorption.

Here is a list of things to help fix a Phosphrus Deficiency.

Chemical

Advanced nutrients Bloom (0-5-4)
Vita Bloom (0-7-5)
BC Bloom (1.1-4.4-7)
GH Flora Bloom (0-5-4)
GH Maxi Bloom (5-15-14)
GH Floranova Bloom (4-8-7)
Dyna-Gro Bloom (3-12-6)
Fox Farm Tiger Bloom (2-8-4)
Awsome Blossums

Organic

Dr. Hornby's Iguana Juice Bloom (4-3-6)
Advanced Nutrients Mother Earth Bloom (.5-1.5-2)
Fox Farm Big Bloom (.01-.3-.7)
Earth Juice Bloom (0-3-1)
Pure Blend Bloom (2.5-2-5)
Pure Blend Pro Bloom (2.5-2-5)
Buddswell (0-7-0)
Sea Island Jamaican Bat Guano (1-10-0)
Indonesian Bat Guano (0-13-0)
Rainbow Mix Bloom (1-9-2)
Earth Juice Bloom (0-3-1)
BIO BLOOM (2-6-3.5)
AGE OLD BLOOM (5-10-5)
ALASKA MORBLOOM (0-10-10)
METANATURALS ORGANIC BLOOM (1-5-5)


Any of these will cure your phosphorus deficiency. Affected leaves will not show recovery but new growth will appear normal.


Now if you added to much chemical ferts and or organics,( which is hard to burn your plants when using organics) You need to Flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.



Note: Blood Meal, Dried Blood, Guanos, Kelp Meal, Cotton Seed Meal, Peat Moss,
Sulfur and fish meal are all acidic and can bring your ph down, so if you add these please monitor your ph when using those.

Note: Bone Meal, Rock Phosphate, Wood Ashes pretty much all ashes, Shellfish Compost and Crab Meal are all alkaline and can make your ph go up, so if you add any of these please monitor your ph.




Picture 1 is what a phosphorus deficiency looks like in flowering.

אני מצרף תמונות משלי שלדעתי זה מחסור בפוספורוס

לפעמים פוספורוס ופוטסיום נראים דומה

עוד פוספורוס, P

התמונה עם העלים הסגולים והנבט הצעיר מראה מחסור בפוספורוס כתוצאה מטמפ נמוכות (לא שלי

K אשלגן, פוטסיום

Potassium (K) Mobile Element and Macro Element

Potassium plays a big role as well. Having good amounts of potassium in your plants helps in having sturdy and thick stems, disease-resistance, water respiration, as well aids in photosynthesis. Potassium is also found in the whole plant. It is necessary for all activities having to do with water transportation. Potassium is necessary for all stages of growth, especially important in the development of Buds.

Having to little of Potassium in your plants causes the plants leaves to show retarded growth and show a scorched tip and edges around the leaves. Plants may stretch and your branches can be easily broken or weak. Don’t get this deficiency confused with iron, because it almost acts like iron but to tell the difference in the two is: for potassium the tips of the leaves curl and the edges burn and die. Older leaves may show a red color and leaves could curl upwards. Dead patches (Necrosis) can happen on the margins of larger fan leaves thus, the leaves will eventually die off and turn brown. The Older leaves will show different patches of color (mottle) and turn yellow between the veins, following by whole leaves that turn dark yellow and die. The plants overall growth slows down, mostly when they are in vegetative stage. To little amount of potassium also slows the growth of buds during flowering stages. Dark edges will appear around the edges of the leaf when the deficiency is starting to happen. When your Relative humidity is low, you can almost bet your going to soon get a potassium deficiency from your plants perspiration.
Potassium can get poorly absorbed when having too much Calcium or ammonium nitrogen, and maybe cold weather. Having to much sodium (Na) causes potassium to be displaced. SO keep those in mind… Parts affected by a Potassium Deficiency are: older leaves and leaf margins.


When you have too much Potassium in your soil, it can lead to big troubles, like salt damage and acid fixation of the root system, as well as too much potassium can cause a calcium deficiency. Your fan leaves will show like a light to a dark yellow to whitish color in between the veins. Due to a molecular imbalance, potassium toxicity can cause a reduced uptake and lead to the deficiencies of Mg, and in some cases, Ca. Also leads to the other nutrients to not be absorbed properly leading to lots of other deficiency such as: magnesium, manganese, zinc and iron and can cause problems with calcium as well.



Problems with Potassium being locked out by PH troubles
Soils with excessive Leeching and High ph soils and or water.Soils that are potassium fixated. An excess of kitchen salts (sodium) in the root system/enviroment.


Soil

Potassium gets locked out of soil growing at ph levels of 4.0-5.5
Potassium is absorbed best in soil at a ph level of 6.0-9.5. (Wouldn’t recommend having a ph of over 7.0 in soil) anything out of the ranges listed will contribute to a Potassium deficiency.


Hydro and Soil less Mediums

Potassium gets locked out of Hydro and Soil less Mediums at ph levels of 4.0-4.5, 6.0-6.5.
Potassium is absorbed best in Hydro and Soil less Mediums at ph levels of 4.7-5.3, 6.7-8.5. (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a potassium deficiency.



Solution to fixing a Potassium deficiency
Any Chemical/Organic nutrients that have potassium in them will fix a potassium deficiency. Again Peters All Purpose plant food 20-20-20, will cure the potassium deficiency , Miracle grow Tomato plant food, Miracle grow All purpose plant food.( Only mixing at ½ strength when using chemical nutrients, or it will cause nutrient burn!) Some other supplements of potassium are: Wood ashes, which are fast absorption, Kelp Meal, which is medium absorption, Greensand, which is slow absorption, granite dust, which is slow absorption. Sulfate of Potash, Sulfate of Potash Magnesia, Muriate of Potash, which are medium absorption. FOXFARM GROW BIG HYDROPONIC CONCENTRATE, which is fast absorption. (FFGB can bring your ph down as well) Earth Juice Meta-K, which is fast acting. (Can bring down your ph as well) Leaves will never recover, but the plant will show recovery after about 4 to 5 days when using a fast acting nutrient.

Note: Wood Ashes, can make your ph go up a bit, so please monitor your ph when using it.
Now if you added to much chemical nutrients and or organics, (which is hard to burn your plants when using organics) you need to flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.

תמונות של מחסור בפוטסיום, להערכתי

עוד פוטסיום

MG מגנזיום

Magnesium (Mg) - Micronutrient and Mobile Element


Magnesium helps supports healthy veins while keeping a healthy leaf production and its structure. Magnesium is significant for chlorophyll-production and enzyme break downs. Magnesium which must be present in relatively large quantities for the plant to survive, but yet not to much to where it will cause the plant to show a toxicity.


Magnesium is one of the easiest deficiencies to tell… the green veins along with the yellowness of the entire surrounding leave is a dead giveaway, but sometimes that’s not always the case here. In case you have one of those where it doesn’t show the green veins, sometimes leaf tips and edges may discolor and curl upward. The growing tips can turn lime green when the deficiency progresses to the top of the plant. The edges will feel like dry and crispy and usually affects the lower leaves in younger plants, then will affect the middle to upper half when it gets older, but It can also happen on older leaves as well. The deficiency will start at the tip then will take over the entire outer left and right sides of the leaves. The inner part will be yellow and or brownish in color, followed by leaves falling without withering. The tips can also twist and turn as well as curving upwards as if you curl your tongues.


Excessive levels of magnesium in your plants will exhibit a buildup of toxic salts that will kill the leaves and lock out other nutrients like Calcium (Ca). Mg can get locked out by having too much Calcium, Chlorine or ammonium in your soil/water.
One of the worst problems a person can have is a magnesium def caused by a ph lockout. By giving it more magnesium to cure the problem when you are thinking you are doing good, but actually you are doing more harm then good. When the plants can’t take in a nutrient because of the ph being off for that element, the plant will not absorb it but it will be in the soil… therefore causing a buildup. A buildup will be noticed by the outer parts of the plant becoming whitish and or a yellowish color. The tips and part way in on the inner leaves will die and feel like glass. Parts affected by Magnesium deficiency are: space between the veins (Interveinal) of older leaves; may begin around interior perimeter of leaf.

**Note- If your tap water is over 200 ppm Magnesium will be locked out due to the calcium in the water. Magnesium can get locked out by too much Calcium (Ca), Chlorine (Cl) or Ammonium Nitrogen (NH4+). If this is your problem we suggest using bottled or RO (reverse osmosis) water


Problems with Magnesium being locked out by PH troubles

Light Acid Soils, soils with excessive potassium, calcium and or phosphorus


Soil

Magnesium gets locked out of soil growing at ph levels of 2.0-6.4
Magnesium is absorbed best in soil at a ph level of 6.5-9.1 . (Wouldn’t recommend having a ph of over 7.0 in soil) anything out of the ranges listed will contribute to a Magnesium deficiency.



Hydro and Soil less Mediums

Magnesium gets locked out of Hydro and Soil less Mediums at ph levels of 2.0-5.7
Magnesium is absorbed best in Hydro and Soil less Mediums at ph levels of 5.8-9.1
(Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a Magnesium deficiency.



Solution to fixing a Magnesium deficiency
Any Chemical/Organic nutrients that have Magnesium in them will fix a Magnesium deficiency. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!)
Other nutrients that have magnesium in them are: Epsom salts, which is fast absorption. Dolomite lime and or garden lime (same thing just called different) which is slow absorption. Sulfate of Potash, Magnesia which is medium absorption. Worm Castings, which is slow absorption. Crabshell which is slow absorption. Earth Juice Mircoblast, which is fast acting. (a must buy!! Has lots of 2ndary nutrients).
Now if you added to much chemical nutrients and or organics,( which is hard to burn your plants when using organics) You need to Flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.


אפשר להשיג מלח אפסום בבתי מרקחת של ניו-פארם. 30 גרם עולים 10 ש"ח
לבקש "מלח אנגלי" אני ממליץ להוסיף להשקיה, 5% מהמיקסוס או יותר אם צריך
אפשר גם בריסוס עלוותי, אי.סי 2.0 בערך

מלח אפסום מכיל 10% מגנזיום ו-13% סולפור

CA סידן קלציום

Calcium (Ca) -Macro Nutrient and an Immobile element.

Calcium is another important element that helps the plants cell walls, cell division in making the plants stems, stalks, branches stronger, as well as contributing to root growth, mostly the newer root hairs, Calcium also helps enhancing the uptake of K in the the plants roots. Calcium moves really slow within the plant and tends to concentrate in roots and older growth.



When plants exhibit a Calcium deficiency the younger leaves are the first to show it as well as older leaves. The Leaf tips will die back, the tips may curl, and growth of the plant is stunted. The plant can show a weakness in the stems and branches, as well as a under developed root system that can lead to bacteria problems with roots dieing off. Having slow plant transpiration rates can aggravate the uptake of calcium. Make sure your soil isn’t very acidic, for calcium gets harder to be absorbed through acidic soils, Which leads to having a plant that is deficient in Calcium. The leaf tips, edges and new growth will or may turn a yellow/brown color that happen in spots and often surrounded by a sharp brown outlined edge and then the leaf tips die back. If too much calcium is given at an early stage of growth it can stunt the growth of your plants. Having to much of calcium will also flocculate when a concentrated form is combined with potassium. The parts affected by a calcium deficiency are the roots. Stem or petiole, young or old leaves.

Too much Calcium will lead to other micronutrient deficiencies. Calcium fixation is caused by many types of mediums such as: clay soils, unbuffered coco and humus. The lime tends to bond to these soils very easily. The stems of the plant will not be able to hold the plant up and will exhibit a white brown in between the veins of the leaves when having too much calcium. Also having to much potassium and or nitrogen will cause a calcium lockout.



Problems with Calcium being locked out by PH troubles

Very acidic soils with excessive potassium, dry and or wet soil. Lack of calcium in the soil may cause too acidic soil. This may cause to Mg or Iron deficiency or very slow stunted growth


Soil


Calcium gets locked out of soil growing at ph levels of 2.0- 6.4
Calcium is absorbed best in soil at a ph level of 6.5-9.1 (Wouldn’t recommend having a ph of over 7.0 in soil) anything out of the ranges listed will contribute to a
Calcium Deficiency.


Hydro and Soil less Mediums

Calcium gets locked out of Hydro and Soil less Mediums at ph levels of 2.0- 5.3
Calcium is absorbed best in Hydro and Soil less Mediums at ph levels of 5.4-5.8 (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a Calcium Deficiency.




Solution to fixing a Calcium deficiency
To fix a calcium deficiency you can treat by foliar feeding with one teaspoon of dolomite lime or Garden lime per quart of water, Or Any Chemical/Organic nutrients that have Calcium in them will fix a Calcium deficiency. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!)
Or you can take crushed up dolomite lime or garden lime in a gallon of water and water it in the soil. 1 to 2 teaspoons per gallon of water, which will be slow acting. Garden Gypsum, which is medium absorption. Limestone, which is medium absorption, Rock Phosphate and Animal wastes which are both medium/slow absorption. Note: Caution when using gypsum to an already acid soil (pH that is less than 5.5) can have a very bad effect on different types of plants by effecting the absorption of soil aluminum, which is poison to plant roots.


Now if you added to much chemical nutrients and or organics, (which is hard to burn your plants when using organics) you need to flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.


בישראל אפשר להשיג קלמג+ של בוטניקר בהידרוגארדן, וקאלמאקס בהידרוגארדן והידרוגרו



Pictures 1-2 shows calcium deficiencies. First one shows late, 2nd one shows early development.

דוגמאות למחסור בסידן

עוד סידן\קלציום

ZN זינק אבץ

Zinc (Zn) Micro Nutrient and an Immobile element.


Zinc plays a lot of roles in the plants, first off zinc aids in the plants size and maturity as well as production of leaves, stalks, stems and branches. Zinc is an essential component in many enzymes as well as growth hormone auxin .Low auxin levels can be the cause of stunting of the plants leaves and the shoots. Zinc is also important in the formation and activity of chlorophyll. Plants that have a good level of Zinc, can handle long droughts. So that’s why Zinc plants an important role how it absorbs moisture.


Zinc deficiencies on some plants will have the Spotting and bleached spots (chlorosis) between the veins first appears on the older leaves first, and then goes on to the immature leaves. It will then start to slowly affect tips of growing points of the plants. When the zinc deficiency happens so suddenly, the spotting can appear to be the same symptoms to that of an iron and manganese, without the seeing the little leaf symptom.
Zinc is not mobile in plants so the symptoms will occur mainly in the newer growths. Having a plant that is deficiency in Zinc can cause small crops, short shoots and have a cluster of small distorted leaves near the tips. Between the veins (Interveinal) yellowing is often combined with overall paleness. Pale or grayish, yellowing between the veins; rosetted weak is the signs of a Zinc deficiency.
With a low level of zinc in your plants, your yields will be dramatically reduced.
Interveinal chlorosis is present in the small, narrow distorted leaves at the ends of really shortened shoots and the shortening between internodes. Leaf margins are often distorted or wrinkled. These nutrients will get locked out due to high pH: Zinc, Iron, and Manganese. These deficiencies will often occur together. Parts affected by a zinc deficiency are young leaves and petioles.

Having an excess of Zinc is very rare, but when it does happen it can cause wilting and in worse cases death.


Problems with Zinc being locked out by PH troubles

High ph, Low organic matter, High Phosphorus levels in the soil, and or lack of nitrogen.


Soil

Zinc gets locked out of soil growing at ph levels of 4.5-4.7, 7.5-9.5
Zinc absorbed best in soil at a ph level of 5.0-7.0 (Wouldn’t recommend having a soil ph of over 7.0 in soil) Anything out of the ranges listed will contribute to a Zinc Deficiency.

Hydro and Soil less Mediums

Zinc gets locked out of Hydro and Soil less Mediums at ph levels of 5.7-8.5
Zinc is absorbed best in Hydro and Soil less Mediums at ph levels of 4.0-5.5 (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a Zinc Deficiency.




Solution to fixing a Zinc deficiency
Any Chemical/Organic nutrients that have potassium in them will fix a Zinc deficiency. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!)
And any of the following nutrients will fix a zinc deficiency: Zinc sulfate, zinc chelated, or zinc oxides are adequate fertilizer sources for zinc. Or you can bury galvanized nails in the soil. (Make sure you take off the sharp point at the end to prevent roots from being damaged) Garden Manure, which is slow acting. Greensands, Cottonseed Meal are both medium/slow absorption as well.



Now if you added to much chemical nutrients and or organics,( which is hard to burn your plants when using organics) You need to Flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.

Picture 1 is a zinc deficiencies in vegetative growth.

FE ברזל

Iron (Fe) Micro Nutrient and an Immobile element


Iron is an important component of the plants enzyme and is also important for the transportation of electrons while photosynthesis is happening...


Iron reacts with many of the components of nutrient solutions, which will cause a nutrient lockup to occur, If you add to much Iron without adding enough Phosphorus, you can contribute to a phosphorus deficiency , so watch out how much iron and phosphorus your nutrients have. The Leaves on the plant can turn a pale yellow along the growing shoots, while the veins remain dark green. When you have pH imbalance, it can make iron insoluble. The tissue between the veins becomes pale or white, kind of mimics the magnesium deficiency, but not yellow, iron has the white where the yellow would be on the magnesium deficiency. The deficiency starts with the lower and middle leaves, while the new leaves become completely lacking in chlorophyll, but with little or no necrotic spots. The chlorotic mottling on new leaves starts first near the bases of the leaflets, so the middle of the leaf appears to have a yellow mark. Iron is difficult for plants to absorb and moves really slowly in the plant.
Harder for outdoor plants to absorb when in hot weather. Parts affected by the Iron Deficiency are: Young leaves and Petioles.

To much Iron can cause a problem that looks like a PH imbalance, Brown spotting on the top leaves, mainly fan leaves. Can affect the whole plant. Iron Toxicity is rare for Ph below 5.5.



Problems with Iron being locked out by PH troubles
Over watering, pests nematodes, not enough drainage, like not enough perlite. High ph, Soils with low iron, High Phosphorus, Excess Zinc, manganese or copper.



Soil

Iron gets locked out of soil growing at ph levels of 2.0-3.5
Iron is absorbed best in soil at a ph level of 4.0-6.5 (Wouldn’t recommend having a soil ph of over 7.0 in soil) anything out of the ranges listed will contribute to an Iron Deficiency.



Hydro and Soil less Mediums

Iron gets locked out of Hydro and Soil less Mediums at ph levels of 2.0-3.5
Iron is absorbed best in Hydro and Soil less Mediums at ph levels of 4.0- 6.0 (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to an iron deficiency.




Solution to fixing a Iron deficiency
Any Chemical/Organic nutrients that have potassium in them will fix a Iron deficiency. (Only mixing at ½ strength when using chemical nutrients, or it will cause nutrient burn!) Foliar feed with chemical fertilizer containing Fe or rusty water can work well. Other supplements that have Iron in them are: Iron chelates, Ferric oxide, Ferrous oxide, Ferrous sulfate, all of these are fast absorption. Greensand, Cottonseed Meal is slow absorption, Garden Manure, which is medium absorption. Manure is most common organic iron source to use.


Now if you added to much chemical nutrients and or organics,( which is hard to burn your plants when using organics) You need to Flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.

MN מנגניז

איזה שם הביאו למינרל הזה

Manganese (Mn) Micronutrient and Immobile Element


Manganese Helps enzymes break down for chlorophyll and photosynthesis production, as well as it works with plant enzymes to reduce nitrates before producing proteins.

Having plants that are deficient in manganese can turn the young leaves into spotted (mottled) yellow and or brown areas on young leaves. Dead (Necrotic) yellow spots form on top leaves, while the lower older leaves will or may have gray specks and or spots. Symptoms can include yellowing of leaves while the leaf veins can stay green. Can also produce a chequered effect. As the plant gets newer growths the plant will seem to grow away from the problem, that’s why the younger leaves may be unaffected. On the top of the leaves, brown spots can appear. While the severe areas of the leaves turn brown and wither. Parts Affected by a Manganese deficiency are: Young leaves.


Too much Manganese in the soil will cause an iron deficiency. The blotchy leaf tissue is caused by not enough chlorophyll synthesis. Your plants will seem to have very weak vigor caused by the excessive amount of manganese.

Problems with Manganese being locked out by PH troubles

Soil ph of over 6.5, High iron soils, Low nitrogen Soils, Dry weather
and compacted soil.


Soil

Manganese gets locked out of soil growing at ph levels of 2.0-5.0
Manganese is absorbed best in soil at a ph level of 5.5-6.5 (Wouldn’t recommend having a soil ph of over 7.0 in soil) anything out of the ranges listed will contribute to a Manganese Deficiency.


Hydro and Soil less Mediums

Manganese gets locked out of Hydro and Soil less Mediums at ph levels of 2.0-4.5
Manganese is absorbed best in Hydro and Soil less Mediums at ph levels of 5.0-5.6 (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a manganese deficiency.

Solution to fixing a Manganese deficiency
Foliar feed with any chemical fertilizer containing Mn., or mix with water and water your plants with it. Any Chemical/Organic nutrients that have Manganese in them will fix a Manganese deficiency. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!) Other nutrients that have Manganese in them are: Manganese chelate, Manganese carbonate, Manganese chloride, Manganese dioxide, Manganese oxide, Manganese sulfate, which are all fast absorption. Garden Manure, Greenssand are both good sources of manganese and are medium/ slow absorption.

Now if you added to much chemical nutrients and or organics,( which is hard to burn your plants when using organics) You need to Flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.

s סולפור

Sulfur (S) Micro Nutrient and an Immobile element

Sulfur plays an important role in root growth, chlorophyll supply and plant proteins. Just like iron, Sulfur moves slowly in the plant, hotter temps will make Sulfur harder to absorb like iron. But unlike iron, Sulfur is distributed evenly throughout the plant, mainly the big fan leaves. Sulphur is also a very important element in vegetative growth.

First signs of a Sulfur deficiency are pale young leaves. The growth of leaves will remain slow, but the leaves can also get brittle and stay narrower than normal. Can also have small mutated leaves, along with the buds on top of flowering plants will die off. The growth if the plant can be stunted as well as yellowing of the younger leaves and new growth. Unlike a magnesium deficiency where it starts from the leaves tip and around, sulfur starts from the back of the leaves on forward to the middle of the leaves. The Stems become Hard, thin and may be woody. Some of the plants may show orange and red tints rather than yellowing. The stems will increase in length but not in diameter. Leaves will then be stiff and brittle like glass and fall off soon. Parts affected by a Sulfur deficiency are: The whole plant can be affected as well as young leaves, leaf veins.

Too much Sulfur will cause your plants to be small along with the size of your leaves, along with your leaves being brown and dead looking at the tips. An excess of sulfur can also look like salt damage, restricted growth and dark color damage.


Problems with Sulfur being locked out by PH troubles



Soil

Sulfur gets locked out of soil growing at ph levels of 2.0-5.5
Sulfur is absorbed best in soil at a ph level of 6.0- 9.5 (Wouldn’t recommend having a soil ph of over 7.0 in soil) Anything out of the ranges listed will contribute to a Sulfur Deficiency.


Hydro and Soil less Mediums


Sulfur gets locked out of Hydro and Soil less Mediums at ph levels of 2.0-5.5
Sulfur is absorbed best in Hydro and Soil less Mediums at ph levels of 6.0- 9.5 (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to an Sulfur deficiency.




Solution to fixing a Sulfur deficiency
Mix 1-2 teaspoons of Epsom salts per gallon of water until condition improves.
Any Chemical/Organic nutrients that have Sulfur in them will fix a Sulfur deficiency. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!) Other sulfur nutrient supplements are: Rain water, Ammonium Thiosulfate, which is all fast absorption. Garden Sulfur, Sulfate of Potash, Gypsum.
Note: Caution when using gypsum to an already acid soil (pH that is less than 5.5) can have a very bad effect on different types of plants by affecting the absorption of soil aluminum, which is poison to plant roots.



Now if you added to much chemical nutrients and or organics, (which is hard to burn your plants when using organics) you need to flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.


בהרבה מקרים של צמחים בצמיחה מהירה, התפרחת החדשה צהבהבה\חיוורת מעט
זה הצמיחה מהלילה שעוד לא הספיקה לפתח כלורופיל
זה יכול להיראות ממש כמו סולפור לפעמים. צריך לשים לב שזה ניכר בעיקר בבוקר כשהאור עולה

אם גם אחרי 12 או 18 שעות אור מרכז התפרחת הצעירה צהוב חזק, זה מחסור בסולפור



בישראל אפשר להשיג מלח אפסום בבתי מרקחת של ניו-פארם. 30 גרם עולים 10 ש"ח
לבקש "מלח אנגלי" אני ממליץ להוסיף להשקיה, 5% מהמיקסוס או יותר אם צריך
אפשר גם בריסוס עלוותי, אי.סי 2.0 בערך

מלח אפסום מכיל 10% מגנזיום ו-13% סולפור


Pictures 1 shows a sulfur deficiency, notice how at the top part the yellow is starting from the backside of the leaf towards the front.....

דוגמאות למחסור בסולפור

Boron (B) Micronutrient and Immobile element

Boron is important when dealing with maturation, pollen germination and seed production. As well as keeping calcium in soluble forms and keeping the stems, stalks, branches strong. Born keeps good color on the leaves and helps produce the plants structure. Boron also aids in cell division and protein formation.

Boron deficiencies will show up first in younger leaves (they may turn yellow), then moves up the plant. Boron deficiency can resemble calcium deficiency. Stunting, discolouration, possible death of the growing tips, bud abortion and development. The Roots will show a stunted with swollen short secondary roots, leaves distorted, sometimes bronzed or scorched. Tip of the shoot dies; stems and petioles are brittle. Boron deficiency plants are easy to tell, because of the spotting the leaves show like a strawberry mark and or splashes of the marking. Boron-deficiency symptoms first appear at the growing points. They also can show signs of newer growths turning gray and or dying, bud deformed, curling of the leaves which are often spotted and discolored. Newer growths appear to look like they are burnt. They can show signs of hollow stems along with yellowish to brownish color leaves. Dead (Necrotic) spots develop between leaf veins, as well as the leaves becoming thick. The leaves will wilt with necrotic and chlorotic spotting. Boron is poorly absorbed with low potassium content. First signs of the deficiency are abnormal growth tips. Having not enough boron can also invite troubles for fungus problems from the internal tissues to rot away, as well as the root hairs along with them being discolored. To avoid having a Boron deficiency try to keep the ph below 7 and to improve the moisture as well as retaining light soils.


Too much boron in your plants can produce a lot of problems. The leave tips turn yellow progressing inwards causing the plant to soon die slowly along with leaves dropping a lot.
Can show same signs as if a magnesium deficiency, but only happens on newer growths. Parts affected by a boron deficiency are: Growing points and young leaves.



Problems with Boron Being Locked out by PH troubles

Soil ph under 5.5 or over 6.8, sandy soil, soil with low organic matter and or lack of nitrogen.



Soil

Boron gets locked out of soil growing at ph levels of 2.0-5.0
Boron is absorbed best in soil at a ph level of 5.0-7.0 (Wouldn’t recommend having a soil ph of over 7.0 in soil) Anything out of the ranges listed will contribute to a Boron deficiency.


Hydro and Soil less Mediums

Boron gets locked out of Hydro and Soil less Mediums at ph levels of 2.0-5.0
Boron is absorbed best in Hydro and Soil less Mediums at ph levels of 5.0-6.0(Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a boron deficiency.



Solution to fixing a Boron deficiency
One of the ways you can fix a boron deficiency is to either foliar spray or water regular. Treat with one teaspoon of Boric acid (sold as eyewash) per gallon of water. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!) Other nutrients that have boron in them are: Borax, Boric Acid, Colemanite, Sodium pentaborate, Sodium tetraborate, which are ALL fast absorption. Garden Manure, Bone Meal are both good boron supplements, but are slow/medium absorption.

Now if you added to much chemical nutrients and or organics, (which is hard to burn your plants when using organics) you need to flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good enough to get rid of excessive nutrients.




These pictures show a boron deficiency in different stages.
Picture 1 (Contributed by: Turkish)

Copper (Cu)

Copper plays a big role in producing healthy plants, stems, branches and new growths, as well as for the plants reproduction and maturity.
It also assists in carbohydrate metabolism and oxygen reduction.


Copper deficiency plants shows a lack of growth, growth tips die back, green leaves will show a bluish hue and plants may have a hard time showing maturity in vegging stages. Copper deficient plants causes irregular growth and wilting in the newer growths. The Leaves at top will wilt easily along with bleaching (chlorosis) and necrotic areas in the leaves. Leaves on the top of the plant may show veinal chlorosis.(bleaching of the veins)
Growth and yield will be diminished along with spots on the leaves that are necrotic.

To much copper in the system will cause the plant to die, as if it was a poison.Near death the plant will induce iron deficiencies and the root system will decay along with abnormal size of the roots, along with little side branching. Some new growths may not open up, along with becoming thin pale green to a bluish hue. Parts affected by copper deficiency are: new shoots, young leaves, and or the whole plant.



Problems with Copper being Locked out by Ph Troubles

High ph along with highly compacted soil that has a lack of nitrogen.



Soil

Copper gets locked out of soil growing at ph levels of 2.0- 4.5
Copper is absorbed best in soil at a ph level of 5.0-7.5 (Wouldn’t recommend having a soil ph of over 7.0 in soil) anything out of the ranges listed will contribute to a Copper deficiency.


Hydro and Soil less Mediums

Copper gets locked out of Hydro and Soil less Mediums at ph levels of 6.5-9.0
Copper is absorbed best in Hydro and Soil less Mediums at ph levels of 2.0-6.0 (Wouldn’t recommend having a ph over 6.5 in hydro and soil less mediums.) Best range for hydro and soil less mediums is 5.0 to 6.0. Anything out of the ranges listed will contribute to a copper deficiency.



Solution to fixing a Copper deficiency
One way to treat a copper deficiency is by foliar feeding with Copper Sulphate, Cu sulfate, Cu chelates, Those 3 can also be used in soil. Any Chemical/Organic nutrients that have copper in them will fix a copper deficiency. (Only mixing at ½ strength when using chemical nutrients or it will cause nutrient burn!)
Other nutrients that have copper in them are: Granular, Garden Manure, Greensand.


Now if you added to much chemical nutrients and or organics, (which is hard to burn your plants when using organics) you need to flush the soil with plain water. You need to use 2 times as much water as the size of the pot, for example: If you have a 5 gallon pot and need to flush it, you need to use 10 gallons of water to rinse out the soil good
enough to get rid of excessive nutrients. Damaged leaves will NOT recover.





Picture 1 is a copper deficiency, (it may look like a over fertilization ( nitrogen) but look at the bottom of the leaves, notice how they are yellow and a bit of white, also some of the fan leave tips are brown and dying off.)