Diy bho extractor

Now im not claiming that this is the best, safest or most practical way of doing it or ne thing as such. This is just how I was showed many yrs ago and thought I would pass it on.
WARNING!!WARNING!! DONT TRY THIS AT HOME I AM A TRAINED STUNT MAN/STONER!! OTHERES OUT THERE LIKE ME PLEASE LET ME KNOW IF I LEFT SOMETHING OUT IM SORDA BAKED!! LOL


Supplies and tools you will need:
-(14in.) 1 1/4 PVC pipe, give or take
-(2) 1 1/4 End caps
-Duct Tape
-Old T-shirt
-Drill
-2 drill bits (forgot exact sizes) stoner will get into that later
-(2) Pyrex bowls (one should fit inside the other)
-Butane cans 5x refined is recommended
-Razor Blade /Spoon

Supplies for safty as needed
-Goggels
-Gloves
-Mask
-Fire Extinquisher for stoners

STATIC ELECTRIC SPARK, OR FLAME OF NE KIND CAN IGNITE BUTANE SO NO LIGHTERS OR SOCKS ON CARPET. GO OUTSIDE!!

Fist let me say guys please be safe making BHO. It can be very dangerous and can kill you. So please be safe and sober while making and for God sake do it outside with fresh air/breeze.

Sorry guys Im not the best speller or instructer either so here goes..lol

Im gona start posting pic.. Its pretty self explanitory.. Under the pic I will make notes. If you have ne question feel free to ask away.

right basic supplys



They were out of the 5x so I setled for 3x King its not
the best but will do i have since learned finer things in life


some outdoor trimmings




Ok this cap is where your butane/oils will come out. YOu want to take the smallest drill bit you can find I forget exact size but its tiny. Dirll several holes.




This is your other end cap where you will insert the tip of your butane can. The bit I used was alittle bigger then the tip for a snug fit. Some cans come with connecter tabs in the cap to help give a tighter seal.


Next cut you a small square from an old tshirt. This will act as a filter to keep debree out of your oils. Place it over the PVC pipe.



Then cap it off with the cap that has all the small holes. I use a rubber mallat for a tight fit.
Then tape cap to pvc to ensure the end cap doesnt fly off from pressure. This is important so tape good. lol you will not be taking this cap back off.



Next stuff the other end of pipe with your material.
feel free to use a pdt (pokey down thing) but dont do to tightly otherwise butane will struggle to get through






thn cap it off with your other peice you drilled earlier and tape it up but make sure your able to get off again


then start gassing
(Shake Butane)
Hold pipe over Pyrex bowl and insert butane. With this size pipe I usually run (2) 300ml cans thru.


About 3/4 the way thru your fist can you should start to see butane/oils drippin into your dish. If not then your pipe is packed to tight. When that first can is empty pull it and start your second can.

Next you wanta purge the butane. Butane evaporates at room temperature. So you could just let it sit but will take a long time. So I take another larger Pyrex with warm water and sit the butane/oil
dish inside it.
Becarfull not to let the water over flow into your oil dish.

If its bubblin the butane is evaporating into the air.
Once all the butane is gone you will see the oil bubblen up the last gases traped underneath.


This can take a while so be patient.
Next I take my razor blade and spread it as thin as I can get it. Like butter. lol Then I let it sit for atleast 24-48 hr. Just to ensure that all the butane is gone.

Nice work bruv,seems to do the job nicely and without costing the earth.... JBo ;]

I've been warned off pvc use stainless steel or glass
I don't think pvc is butane proof

JNewton said:

I've been warned off pvc use stainless steel or glass
I don't think pvc is butane proof

Click to expand...

this

thanks shafty,does the trim need to be dry,i assume so?

Nice guide mate, but you are better off using cheap coffee paper filters instead of some torn off t-shirt

Reminds me of the plastic honey bee extractor



Personally I'd recommend investing in some glass though if you are making BHO on a regular basis

thanks man...always wanted to try this but other tute are always long winded and technical...i can manage pdt lol ..great stuff thanks

nice stuff ramius

trim can be dry/frozen

like said is few years old, pvc is fine aslong as its not the thin stuff that will crack over time
regards t shirt know its not ideal was shown this when was about 16 lol could use fine micron mesh/coffee filters so can eaily be impoved just thought is gd base for anyone starting out and costs feck all
couple things forgot to add
depending ho ground up weed it will get diff results texture/taste wise dunno how why this works just does
and if get your bho and whisk/whip air into can make a butter like material makes really easy to handle

Take care with the plastic tube, my buddy managed to grenade a Copper central heating pipe all over his back garden when he got a bit enthusiastic making BHO [+ possible % of impatient and stoned in da mix]

Best bit was his next door neighbour was sitting on their doorstep 4 feet away, the other side of the fence.

He always used to say the White Newport butane was the cleanest/only one he would use, info from OG back in the day, do you do any washing of the results ?

can you use this oil with a vape,or is it too messy?

never personally tried i usually add a little bud as you would normally then add some oil ontop using the bud as a sponge
works pretty well can be lethal though lol

nice post shafty , i got the honey bee extractor but always have trouble trying to spread the oil on a joint ......it gets a bit sticky lol

edgey

3mm glass drill bit coffee filter and couple of elastic bands gunna wrap bottle in good few layers of gaffa tape just incase

no stoppin you ..love it m8

had no work over last week so gotta keep myself busy go stir crazy with nothing to do lol

ive never smoked bho before how does it compare to reg cured bud? hey u need black ops in your life hehe and bho i had a buddy in mansfield who used to always smoke the bho man he said it was ream..I do hope his ok always think of him...keep trucking bro

all im gunna say is prepare to be areholed the first time moke bho is something to remember The high from BHO is unmatched, Very clean, clear high, feels like your floating
first time tryed it ended up having some killer bong rips ate a whole box of wheetos and passed out

i know need to get copy of black ops just had to service/m.o.t car funtimes so between that n buying grow shit had no pennies left over lol

hahaha class im gner have to have a go at this and keep it in the stash and break in case of emergency ..i had it on pre order ..so lucky and saldy im a big ass grown man and queued up for it ..Im having a mid life crisis... fuk tell me about it with the motor...I had to fit a inline fuel pump fuel filter service oil change etc and all corners pads and discs ..about 500 notes but all labour myself... cya around bro