-
ICMag with help from Landrace Warden and The Vault is running a NEW contest in November! You can check it here. Prizes are seeds & forum premium access. Come join in!
My Works
- Thread starter tpyn
- Start date
tpyn
Member
The first work.
Hoover of green
Building
Has bought new a vacuum cleaner, and old it was a pity to throw out. Has got accustomed to it better and has seen in it lines of the future phytothrone.
All interiors has thrown out, except a crosspiece to which the motor fastened
To hoarfrost by means of such here fastenings
Continuation follows...
Last edited:
tpyn
Member
The first tests
Further has made to order here such pipe of a stainless steel
Has attached it to this partition on which the power unit for coolers and a digital throttle has arranged
digital throttle
It is a ventilation piece
And it is the top cover from within.
There it is possible to notice the automatic machine, the cut off timer and the compressor (which in gathering it is stretched on elastic bands)
Inside the vegetative compartment on a bilaterial tape has pasted
such here reflecting material
On a pipe has attached a cooler
Also there was a thermostat on 35C*
General view inside
Further has made to order here such pipe of a stainless steel
Has attached it to this partition on which the power unit for coolers and a digital throttle has arranged
digital throttle
It is a ventilation piece
And it is the top cover from within.
There it is possible to notice the automatic machine, the cut off timer and the compressor (which in gathering it is stretched on elastic bands)
Inside the vegetative compartment on a bilaterial tape has pasted
such here reflecting material
On a pipe has attached a cooler
Also there was a thermostat on 35C*
General view inside
tpyn
Member
Growing
In accordance with the circumstances I have presoaked 9 seeds Lowrider f2
The vegetative period lasted about 20 days
1 day
4 day
12 day
17 day
For the twentieth day from four survived plants it has turned out two male and two female
They blossomed about 40 days
5 day flowering
10 day flowering
18 day flowering
22 day flowering
28 day flowering
Continuation follows...
aeburnside
New member
very creative work tpyn! good job
ThisBuds4You
Member
Wow, very creative indeed! Amazing!
--
TB4U
--
TB4U
tpyn
Member
Thanks guys! I will continue, and that was not in time a little
35 day flavoring
~40 day - harvest = 42 gramme
The system has proved to be very much effectively. At rather small useful volume (it together with cooltube and a lamp!!!) Vcil29=0,0165046 м3 the vacuum cleaner is capable to give out (with the account of a free grid) ~50gr. Productivity turns out 3029,45 gr./m3. If to measure on the area, Scir29=0,0660185 m2 and 757,36 gr./m2 accordingly. In this execution it is very convenient to look after boxing. In any place I can climb absolutely without problems. Such main requirement which is necessary for convenient service vertical O-ScroG of system as the maximum access from above has been executed. The form and the sizes of a vacuum cleaner has appeared just I Admit very much risked, and did all by eye (capacity of a lamp, diameter cooltube, distance to a grid etc.). It is possible to tell also that to me has in many respects carried.
This growbox has won the first place in annual competition "Dzagi growbox-2007" and first place in "OLK microgrow-07"
In accordance with the circumstances the vacuum cleaner has been disassembled.
A stuffing has left, and the body has thrown out on a dustbin.
I do not say goodbye
35 day flavoring
~40 day - harvest = 42 gramme
The system has proved to be very much effectively. At rather small useful volume (it together with cooltube and a lamp!!!) Vcil29=0,0165046 м3 the vacuum cleaner is capable to give out (with the account of a free grid) ~50gr. Productivity turns out 3029,45 gr./m3. If to measure on the area, Scir29=0,0660185 m2 and 757,36 gr./m2 accordingly. In this execution it is very convenient to look after boxing. In any place I can climb absolutely without problems. Such main requirement which is necessary for convenient service vertical O-ScroG of system as the maximum access from above has been executed. The form and the sizes of a vacuum cleaner has appeared just I Admit very much risked, and did all by eye (capacity of a lamp, diameter cooltube, distance to a grid etc.). It is possible to tell also that to me has in many respects carried.
This growbox has won the first place in annual competition "Dzagi growbox-2007" and first place in "OLK microgrow-07"
In accordance with the circumstances the vacuum cleaner has been disassembled.
A stuffing has left, and the body has thrown out on a dustbin.
I do not say goodbye
Last edited:
tpyn
Member
The second work.
Triumph of will
It is fresher work. Long looked at boxes in PC towers and has not found any which would be really effective, in my opinion. Has not found CFL has disappeared at once, as basically and big tower. I consider that such variant a choice of the weakest and lazy. Only SON-T in Middletower! As the door in a box to be sideways I have decided to collect this time not vertical, but horizontal O-scrog.
Last edited:
tpyn
Member
Building.
At first has collected model 1:1 the future box. Apparently, for convenience of use it has been decided to make two independent elements. A box and a pot.
A growbox
The sizes of PC-tower 40х40х18. The lamp, a grid, a digital throttle and the timer were are taken from a vacuum cleaner. Has ordered a new quartz pipe 150х80х3 at special factory
Last edited:
tpyn
Member
From a box cut out all unnecessary iron.
Has mounted in a back wall 4 PC coolers.
For economy of a place has decided to do without a cartridge and has soldered wires directly to a lamp socle
Has created fastening for a lamp.
The ventilating channel has made from cardboardfoam.
Cut out here such lining to join a wall with a lamp with a wall with PC-coolers.
This photo shows the termination of a pipe and a door wall from within
And it is a muzzle. In it passive having blown. From within it is painted over by the black. Also there the trap for light is established
Has mounted in a back wall 4 PC coolers.
For economy of a place has decided to do without a cartridge and has soldered wires directly to a lamp socle
Has created fastening for a lamp.
The ventilating channel has made from cardboardfoam.
Cut out here such lining to join a wall with a lamp with a wall with PC-coolers.
This photo shows the termination of a pipe and a door wall from within
And it is a muzzle. In it passive having blown. From within it is painted over by the black. Also there the trap for light is established
Last edited:
tpyn
Member
Over a pot in a casing from a power unit has made management. Initially planned the controller
, but then in connection with some failures it was limited to the usual timer.
A yellow arrow from above more to the right - a regulator of turns of ventilation.
A pot
Long searched on shops for suitable capacity.
The system of periodic flooding was initially planned. Has checked up - works
Later it has been decided to use a ground. Cut out a bottom at the top pot, has taken out a pomp and has hammered in all under an outset a ground.
General view
, but then in connection with some failures it was limited to the usual timer.
A yellow arrow from above more to the right - a regulator of turns of ventilation.
A pot
Long searched on shops for suitable capacity.
The system of periodic flooding was initially planned. Has checked up - works
Later it has been decided to use a ground. Cut out a bottom at the top pot, has taken out a pomp and has hammered in all under an outset a ground.
General view
E
Empathy
that is fucking crazy shit. What watt light is in that?
props+!
Emps
props+!
Emps
ThisBuds4You
Member
Dude, you are a genius.
--
TB4U
--
TB4U
tpyn
Member
Growing
All that I in it have had time to make it have landed 6 clones. 
Then from for circumstances it was necessary to sell box together with plants.
Here a photo of another grower. These are the same clones on thirds of week of flowering.
In a consequence by it has been spent upgraid systems. It is a clone of Passion#1.Other cycle.
Recently it has ended, all dries... The Photo of a crop and grammes a bit later.
As a matter of fact it is a vacuum cleaner inserted into a PC-tower.
This box took again the first place on
"Dzagi growbox-2008"
Hi
Empathy
SON-T 100WEmpathy said:
Last edited:
tpyn
Member
Kind health Gantz to you and your plants. To hear pleasant words from you doubly it is more pleasant I remember, how with interest read your report about NGB when only here it was registered... A lot of time has passed, at everyone the way.
In any case I think to you to be pleasant my third work.
Gantz to you and your plants. To hear pleasant words from you doubly it is more pleasant I remember, how with interest read your report about NGB when only here it was registered... A lot of time has passed, at everyone the way.
You about preliminary model or about the box concept?Gantz said:
In any case I think to you to be pleasant my third work.
Last edited:
tpyn
Member
The third work.
This work even in process. This theme unique where is these materials. This time has decided to return to vertical circular Scrog. The cylinder ideally for this purpose approaches. Having taken a walk on shops I has come across here such product. So, get acquainted.
Xenopuf (Xenon padded stool)
Building.
Has bought it a padded stool for frend and now it costs on the future place of the future box. Eyes makes callous. Then, as I will collect, I will make replacement. From the bought I will use only a rag stretching on a padded stool as a condom.As well as in the previous works all is penetrated by experiments. As light this time has been chosen automobile xenon. Son-t Not so it is interesting because of the dimensions. And it would be desirable that that new.
The lamp 35W 6000K works from the electronic block.
It is a power unit 100w 12v 8.5A and the electronic block
Before construction thought over box logistics on a breadboard model 1:3
On a breadboard model it was initially planned two power units, subsequently it has been decided to leave one. Also there there were two electronic blocks for two lamps and the centrifugal fan.
Variant №1
Variant №2
Variant №3
Has decided to make a hybrid 1 and 3 variants
To collect a box has gathered from make-shifts.
To begin with I have cut here such circles from plywood.
As bearing edges took sticks from wooden eaves.
Sketches
Last edited:
